330101-00-27-10-02-00 Bently Nevada 3300 XL 8mm Probe

Bently Nevada 330101-00-27-10-02-00 – 3300 XL 8mm Proximity Probe (3/8-24 UNF)

Core Technical Specifications

• Manufacturer & Series: Bently Nevada 3300 XL – model 330101-00-27-10-02-00.
• Probe Type: 8 mm Proximity Probe, 3/8-24 UNF thread, without armor.
• Unthreaded Length: 0.0 inches (minimum) for flexible mounting.
• Overall Case Length: 2.7 inches (Option 27).
• Total Cable Length: 1.0 meter (3.3 feet) – Option 10.
• Connector Type: Miniature coaxial ClickLoc connector (Option 02) for secure connections.
• Agency Approval: Not required (Option 00).
• Probe Tip Material: Polyphenylene sulfide (PPS) offers excellent chemical resistance.
• Probe Case Material: AISI 303 or 304 stainless steel (SST) ensures durability.
• Origin: Made in U.S.A.

Electrical & Performance Data

• Nominal DC Resistance (RPROBE): 7.59 ± 0.50 Ω (center to outer conductor) for 1.0m length.
• Extension Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical.
• Linear Range: 2 mm (80 mils) from 0.25 mm to 2.3 mm (10 to 90 mils).
• Output Voltage: Approximately –1 to –17 Vdc over the linear range.
• Recommended Gap (Radial Vibration): -9 Vdc, roughly 1.27 mm (50 mils).
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) ± 5% for standard 5 or 1 meter systems (0°C to +45°C).
• Deviation from Best Fit Straight Line (DSL): Less than ±0.025 mm (±1 mil) for standard systems.
• Field Wiring: Use 0.2 to 1.5 mm² (16 to 24 AWG) 3-conductor shielded triad cable.
• Maximum Field Wiring Length: 305 meters (1,000 feet) between sensor and monitor.

Mechanical & Design Enhancements

• TipLoc Molding: Patented method provides a robust bond between probe tip and body.
• CableLoc Design: Provides 330 N (75 lbf) pull strength for secure cable attachment.
• FluidLoc Option: Prevents oil and liquids from leaking through the cable interior.
• Probe Weight: 323 g/m (11.4 oz) – lightweight and easy to handle.
• Probe Case Thread: 3/8-24 UNF.
• Maximum Thread Engagement: 0.563 inches.
• Recommended Case Torque: 11.2 N•m (100 in•lbf) for standard forward mounted probes.

Environmental & Temperature Ratings

• Standard Operating Temperature: -52°C to +177°C (-62°F to +350°F).
• Extended Temperature Range (Tip): -52°C to +218°C (-62°F to +425°F); Cable & Connector: -51°C to +260°C.
• Relative Humidity: Less than 3% change in Average Scale Factor (ASF) at 93% humidity (IEC 68-2-3, 56 days).
• Pressure Seal: Viton® O-ring design; contact custom department for pressure testing.
• Temperature Classification (EPL Ga/Gc): T1 (-55°C to +232°C) through T5 (-55°C to +40°C).
• Avoid exposing the probe to temperatures below –34°C (–30°F) to prevent premature seal failure.

Hazardous Area Approvals

• ia (Intrinsic Safety): With zener barriers (drawing 141092) or galvanic isolators. Class I, Zone 0: AEx/Ex ia IIC T5…T1 Ga; Class I, Groups A-D; Class II, Groups E-G; Class III.
• nA / ec (Non-incendive): Per drawing 140979. Class I, Zone 2: AEx/Ex nA IIC T5…T1 Gc; Class I, Division 2, Groups A-D.

Installation & Mounting Guidelines

• Always use the recommended -9 Vdc gap setting for radial vibration measurements.
• Respect the maximum thread engagement length of 0.563 inches to avoid damage.
• Apply recommended torque of 11.2 N•m (100 in•lbf) for standard forward mounted probes.
• Avoid exposing the probe to temperatures below –34°C (–30°F) to prevent seal failure.
• Use the specified shielded triad cable and keep field wiring under 305 meters.
• Ensure the target material and surface finish meet the 3300 XL system requirements.

Package Contents

• 1 × 330101-00-27-10-02-00 3300 XL 8mm Proximity Probe (1.0m cable).
• 1 × Miniature coaxial ClickLoc connector (pre-installed).
• 1 × Calibration certificate (traceable to international standards).
• 1 × Installation and wiring quick-start guide.

Frequently Asked Questions (FAQ)

• Is this probe brand new and original? – Yes, we guarantee 100% new, original Bently Nevada stock.
• Do you have the 330101-00-27-10-02-00 in stock? – Yes, we maintain inventory for immediate shipment.
• What is the typical lead time? – We ship within 5 business days after order confirmation.
• Which carriers do you use? – We ship via DHL, FedEx, or UPS – worldwide express.
• Can I return this probe? – Yes, we support returns within 30 days of delivery.
• What is the maximum field wiring length? – Up to 305 meters (1000 feet), but check frequency roll-off graphs for high-frequency signals.
• Does this probe work with my existing 3300 XL monitor? – Yes, it is fully compatible with the 3300 XL system.
• What is the pressure rating of the Viton® seal? – Probes are not pressure tested by default; contact us for custom testing.
• What is the TipLoc and CableLoc technology? – These patented designs provide stronger tip-to-body bonding and 330 N pull strength for the cable.

Contact Information Inquiries: sales@nex-auto.com ， +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/