330101-00-12-15-02-00 Bently Nevada 8mm Probe 3300 XL

330101-00-12-15-02-00 Bently Nevada 3300 XL 8 mm Probe

• Manufacturer & Series: Bently Nevada, 3300 XL series. The 330101-00-12-15-02-00 is a direct replacement for legacy 8 mm probes.
• Key Specification – Linear Range: 2 mm (80 mils) beginning at 0.25 mm (10 mils) from target.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) ±5% over 0°C to +45°C for 5m systems.
• Probe Tip Material: Polyphenylene sulfide (PPS) with patented TipLoc molding for durability.
• Case Material & Thread: AISI 303/304 SST with 3/8-24 UNF thread and max engagement 0.563 in.
• Temperature Range (Standard): Operating -52°C to +177°C (-62°F to +350°F).
• Pressure Seal: Viton® O-ring design; contact custom design for pressure testing.
• Humidity Tolerance: Less than 3% ASF change after 56 days at 93% RH (IEC 68-2-3).
• Torque Ratings: Recommended 11.2 N•m (100 in•lbf) for forward mount; first threads 7.5 N•m.
• Nominal DC Resistance: 7.73 ± 0.50 Ω for 1.5m probe length.
• Extension Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical.
• Field Wiring: 0.2 to 1.5 mm² (16-24 AWG), shielded triad, max 305 meters.
• Weight: 323 g/m (11.4 oz).

Frequently Asked Questions

• Q: Is this probe compatible with 3300 XL extension cables?
  A: Yes, the 330101-00-12-15-02-00 works with all 3300 XL 8 mm extension cables and proximity systems.
• Q: What is the maximum cable length between sensor and monitor?
  A: The maximum field wiring length is 305 meters (1,000 feet) for standard 3300 XL Proximitor sensors.
• Q: Can I use this probe in high-temperature environments?
  A: Standard probe supports up to +177°C; ETR version supports up to +218°C at tip.
• Q: What is the linear range of the 330101 probe?
  A: Linear range is 2 mm (80 mils) from 0.25 mm to 2.3 mm, with a scale factor of 7.87 V/mm.
• Q: Do you have this item in stock?
  A: Yes, we maintain stock of the 330101-00-12-15-02-00 and ship within 5 days.
• Q: What torque should I apply during installation?
  A: Recommended torque is 11.2 N•m (100 in•lbf) for standard forward mount probes.
• Q: Are these probes pressure tested before shipment?
  A: Not routinely; contact our custom design department if you require pressure seal testing.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628

Partner NexAuto Technology Limited : https://www.nex-auto.com/