1783-ETAP2F Allen-Bradley Stratix 5700 EtherNet/IP Tap

1783-ETAP2F Allen-Bradley Stratix 5700 EtherNet/IP Tap

Key Technical Specifications

• Brand: Allen-Bradley
• Model: 1783-ETAP2F
• Category: Ethernet Tap
• Series: Stratix 5700
• Manufacturer: Rockwell Automation
• Total Ports: 3
• Copper Ports: 1 RJ45, 10/100 Mbps auto-negotiating
• Fiber Ports: 2 LC connectors, 100 Mbps full duplex
• Tap Type: Fiber, dual-port
• Transmission Speed: 10/100 Mbps
• Fiber Transceiver Type: 100Base-FX IEEE 802.3u
• Optical Wavelength: 1310 nm
• Connector Type: IEC 61754-20 LC
• Maximum Insertion Loss: 0.75 dB per connection
• Maximum Channel Length: 2 km (1.24 mi)
• Power Supply Input: 20.4-27.6 VDC
• Nominal Input Voltage: 24 VDC
• Peak Current Consumption: 260 mA at 24 VDC
• Peak Power Consumption: 6.24 W
• Power Dissipation: 6.24 W
• Isolation Voltage: 30 V continuous, basic insulation
• Status Indicators: OK, Link 1, Link 2
• Installation: DIN Rail or Panel Mount
• Orientation: Horizontal or Vertical
• Supported Topologies: Linear, Star
• Operating Temperature: -25 to 60 °C
• Storage Temperature: -40 to 85 °C
• Relative Humidity: 5 to 95%
• Operating Shock: 30 G
• Non-Operating Shock: 50 G
• Vibration: 5 G at 10 to 500 Hz
• ESD Immunity: 6 kV contact, 8 kV air
• Emissions: Class A
• Weight: 0.20 kg (0.44 lbs)
• Enclosure Rating: Open style

Fiber Connection Specifications

• Transmitter Launch Power: -19 dBm into 62.5/125 µm fiber
• Transmitter Launch Power: -22.5 dBm into 50/125 µm fiber
• Receiver Sensitivity Minimum: -31.8 dBm
• Receiver Sensitivity Maximum: -14 dBm
• Power Budget: 12.8 dB for 62.5/125 µm multimode fiber
• Power Budget: 9.3 dB for 50/125 µm multimode fiber
• Fiber Type: Graded Index per IEC 60794-1-1
• Fiber Connections: Glass, 62.5/125 µm and 50/125 µm multimode
• Simplex or duplex fiber configurations are both acceptable

Performance and Environmental Features

• The copper port auto-negotiates between 10 and 100 Mbps speeds.
• It supports both full duplex and half duplex operation modes.
• The two fiber ports handle 100 Mbps in full duplex mode.
• Fiber connections extend distance and resist electrical noise interference.
• The module draws power externally and needs no backplane connection.
• It operates from -25 to 60 °C for industrial environments.
• Storage temperature ranges from -40 to 85 °C.
• Relative humidity tolerance runs from 5 to 95% without condensation.
• Operating shock rating reaches 30 G for vibration resistance.
• The unit meets Class A emission standards for industrial use.
• It carries CE, C-Tick, Ex, and KC certifications.
• The tap works with Allen-Bradley and third-party EtherNet/IP products.

Installation Guide

• Mount the tap on a DIN rail or directly to an enclosure plate.
• Keep 7.62 cm (3 in.) of clearance below the tap for airflow.
• Leave 2.54 cm (1 in.) of space on the remaining sides.
• Allow 5.08 cm (2 in.) for fiber cable entry and bending radius.
• Connect a Class 2 or SELV power supply within 20.4-27.6 VDC range.
• Use 22-12 AWG copper wire rated at 75 °C or higher.
• Tighten power connectors to 0.6-0.8 N-m (5-7 lb-in).
• Use Category 5e or Category 5 cable for Ethernet connections.
• Confirm all connections before applying power to the unit.

Package Contents

• 1 x Allen-Bradley 1783-ETAP2F Stratix 5700 EtherNet/IP Tap
• 1 x Quick Start Guide
• 1 x DIN Rail Mounting Hardware
• 1 x Protective Packaging

FAQ

• Q: What is the 1783-ETAP2F input voltage range?
  A: It accepts 20.4-27.6 VDC with a nominal 24 VDC input.
• Q: How many ports does this tap provide?
  A: It offers 3 ports total, including 1 copper and 2 fiber.
• Q: What fiber connector type does it use?
  A: It uses IEC 61754-20 LC connectors.
• Q: What is the maximum channel length?
  A: The maximum fiber channel length reaches 2 km (1.24 mi).
• Q: What is the optical wavelength?
  A: The fiber transceiver operates at 1310 nm.
• Q: What is the operating temperature range?
  A: The tap works from -25 to 60 °C.
• Q: What topologies does it support?
  A: It supports both linear and star network topologies.
• Q: What is the maximum power consumption?
  A: It consumes 6.24 W maximum at 24 VDC.
• Q: How much does the tap weigh?
  A: The unit weighs approximately 0.20 kg (0.44 lbs).
• Q: What is the stock status?
  A: We have brand new original stock available now.
• Q: How fast do you ship?
  A: We ship within 5 days using DHL, UPS, FedEx, or similar carriers.
• Q: What is the return policy?
  A: We support 30-day returns for this product.

Contact Information

Inquiries: sales@nex-auto.com
Phone: +86 153 9242 9628

Partner NexAuto Technology Limited: https://www.nex-auto.com/