بسته مانیتور لرزش GE Mark VIe

GE IS220PVIBH1AL Vibration Monitor I/O Pack | Mark VIe Series

Technical Specifications

• Brand & Model: General Electric IS220PVIBH1AL. This Vibration Monitor pack operates within the Mark VIe series.
• Power Input: Uses dual RJ45 Ethernet ports and a 3-pin power input. The pack requires a minimum common mode voltage of 5 V dc.
• Operating Temperature: -30 to 65°C. This range ensures stable performance in harsh industrial environments.
• Dimensions & Weight: Measures 8.26 cm high x 4.19 cm wide x 12.1 cm deep. Weight is only 1 lb (0.45 kg).
• Frame Rates: Supports six frame rates over Ethernet: 3.125, 6.25, 12.5, 25, 50, and 100 Hz. For frame rates slower than 100 Hz, the PVIB enables twin Ethernet networks.
• Channels & Sensor Types: Provides thirteen channels for proximity and vibration data. Channels 1-3 accept accelerometers, Velomitors, seismic sensors, or Proximitors. Channels 4-8 handle Proximitors, Velomitors, and seismic sensors. Channels 9-12 support only Proximitors. Channel 13 accepts a Keyphasor or proximity-type signal.
• LED Indicators: Four LEDs show visual diagnostics: Attn, Pwr, Link, and TxRx. These help you monitor pack status quickly.
• CMRR at 50/60 Hz: -50 dB. This provides strong rejection of common mode noise.
• Probe Power: -24 V dc with 12 mA load per transducer.

Frequently Asked Questions (FAQ)

• Q: Is the IS220PVIBH1AL brand new or refurbished?
  A: We supply only brand new and original General Electric IS220PVIBH1AL packs. No refurbished or counterfeit units.
• Q: Do you have this vibration monitor in stock?
  A: Yes, we keep the IS220PVIBH1AL in stock. We can ship within 5 days after order confirmation.
• Q: What sensor types work with channels 1 through 3?
  A: Channels 1-3 accept accelerometers, Velomitors, seismic sensors, and Proximitors. Other channels have specific restrictions as noted in the specs.
• Q: Can I use this pack with a single Ethernet connection?
  A: Yes, the pack operates with one or two Ethernet connections. For dual connections, ENET1 should link to the R controller network.
• Q: Does auto-reconfiguration work automatically?
  A: Yes, when activated, the controller downloads a reconfiguration file to the I/O pack upon detecting a different configuration during boot.
• Q: What frame rates does the IS220PVIBH1AL support?
  A: It supports 3.125, 6.25, 12.5, 25, 50, and 100 Hz over Ethernet. Twin networks work for frame rates below 100 Hz.

For any inquiries, please contact us: sales@nex-auto.com or +86 153 9242 9628 (WhatsApp). Partner with NexAuto Technology Limited: https://www.nex-auto.com/