FS-SDOL-0448 Honeywell Safety Controller Chassis
-
Nhà cung cấp:
Honeywell
-
Loại:
Controller Chassis
-
Country of Origin:
USA
-
Dimensions:
20*15*7cm
- Weight:
2800 g
- Thẻ: Controller chassis
Honeywell FS-SDOL-0448 Control Processor Chassis Introduction
The Honeywell FS-SDOL-0448 is a modular chassis designed to house control processors and I/O modules in safety instrumented systems. It provides the physical and electrical infrastructure for building reliable safety control systems.
Core Technical Specifications
- Manufacturer: Honeywell
- Product Number: FS-SDOL-0448
- Product Type: Control Processor Chassis/Backplane
- System Compatibility: Honeywell Safety Manager SC System
- Safety Certification: Designed for SIL 3 compliant systems per IEC 61508
- Slot Capacity: 4 module slots (supports mix of processors and I/O modules)
- Power Supply: Integrated 48 Vdc power distribution
Electrical & Power Specifications
- Input Voltage: 24 Vdc ±20% (primary power input)
- Backplane Voltage: 48 Vdc regulated (for module operation)
- Power Capacity: Maximum 150 W total power delivery
- Current Capacity: Up to 3.125 A per slot (48Vdc)
- Power Connections: Dual redundant power input terminals
- Power-up Time: ≤ 2 seconds from power application to ready state
- Backplane Bandwidth: 100 Mbps internal communication bus
- Isolation: 1500 Vrms isolation between power input and backplane
Physical & Mechanical Specifications
- Chassis Dimensions: 350 mm × 120 mm × 200 mm (W × H × D)
- Mounting: 19-inch rack mounting (3U height) or panel mounting
- Slot Pitch: 25 mm between module centers
- Connector Type: High-density DIN 41612 connectors (96-pin)
- Cooling: Passive convection cooling (no fans required)
- Weight (empty): 2.8 kg
- Weight (fully loaded): Maximum 5.5 kg
- Material: Powder-coated steel enclosure
- Color: Safety yellow (RAL 1023)
Environmental Specifications
- Operating Temperature: 0°C to +60°C (32°F to 140°F)
- Storage Temperature: -40°C to +85°C (-40°F to 185°F)
- Relative Humidity: 5% to 95% non-condensing
- Altitude Rating: Up to 2000 meters above sea level
- Vibration Resistance: 1 g (5-150 Hz) operational, 2 g (5-150 Hz) non-operational
- Shock Resistance: 15 g, 11 ms half-sine (per IEC 60068-2-27)
- Protection Degree: IP20 (front panel)
- EMC Compliance: EN 61326-1, EN 61000-6-2, EN 61000-6-4
Features & System Integration
- Hot-Swap Capable: Supports module replacement without system shutdown
- Status Indicators: Multi-color LEDs for power, system status, and slot status
- Diagnostic Features: Power monitoring, temperature monitoring, slot detection
- Redundancy Support: Compatible with redundant processor configurations
- Cable Management: Integrated cable routing channels and strain relief
- Grounding: Dedicated chassis ground connection point
- Expansion: Can be linked with additional chassis for system expansion
Installation & Configuration Guide
- Mount in 19-inch rack using provided mounting brackets (included)
- Ensure minimum 50 mm clearance above and below for ventilation
- Connect redundant 24Vdc power supplies to input terminals
- Install modules starting from left slot (typically processor slot)
- Verify all module latches are securely engaged
- Connect chassis ground to facility ground per local electrical codes
- Use torque of 0.6 Nm for all power and ground connections
Packaging & Shipping Information
- The Honeywell FS-SDOL-0448 chassis is shipped in protective foam packaging
- Package includes chassis, mounting brackets, power connectors, and installation manual
- Dimensions: 450 mm × 180 mm × 300 mm (shipping box)
- Shipping weight: 4.2 kg (including packaging)
- Shipped via FedEx, DHL, or UPS with full tracking and insurance
Frequently Asked Questions (FAQ)
- How many modules can it hold? 4 modules maximum capacity
- What power supply is required? 24Vdc input, provides 48Vdc to modules
- Is it rack mountable? Yes, standard 19-inch rack, 3U height
- Can modules be hot-swapped? Yes, supports hot-swap module replacement
- What safety certification? Designed for SIL 3 compliant systems
For technical specifications or to order the Honeywell FS-SDOL-0448 chassis, contact us.
Email: sales@nex-auto.com
Phone: +86 153 9242 9628
Partner NexAuto Technology Limited :
https://www.nex-auto.com/
© 2025 AutoNex Controls Limited. All rights reserved.
Original Source: AutoNex Controls Limited :
https://www.autonexcontrol.com/
Giao hàng nhanh chóng và đáng tin cậy
Giao hàng nhanh trên toàn thế giới
giúp các dự án tự động hóa của bạn đúng tiến độ.
Chính hãng & Đáng tin cậy
Tất cả các linh kiện đều là hàng chính hãng 100%
đảm bảo hiệu suất đáng tin cậy cho hệ thống của bạn.
- Giao hàng nhanh
- Bảo hành 12 tháng
- 30 Ngày Đổi Trả Dễ Dàng

Hỗ trợ khách hàng
Nhận trợ giúp khi bạn cần nhất
Sẵn sàng Hỗ trợ Nhu cầu Tự động hóa của Bạn
Liên hệ với chúng tôi để biết giá cả, chi tiết sản phẩm hoặc hỗ trợ đặt hàng — các chuyên gia của chúng tôi luôn sẵn sàng giúp đỡ.
Biết Quyền Lợi Trả Hàng Của Bạn
Bạn có 30 ngày để trả lại sản phẩm nếu nó không đáp ứng yêu cầu của bạn. Xem chính sách đầy đủ để biết chi tiết.