330930-065-06-CN Bently Nevada - New Original Cable

Bently Nevada 330930-065-06-CN Extension Cable

Core Product Identification

• Manufacturer: Bently Nevada
• Model Number: 330930-065-06-CN
• Product Type: 3300 NSv Series Extension Cable
• Origin: Made in U.S.A.
• Key Feature: Equipped with FluidLoc cable technology for enhanced reliability.

Physical & Construction Specifications

• Cable Length: 6.5 meters (21.3 feet)
• Construction: No stainless steel armor, utilizing FluidLoc cable design.
• Cable Type: 75 Ω coaxial with FEP (Fluorinated Ethylene Propylene) insulation.
• Operating Temperature: -51°C to +177°C (-60°F to +351°F)
• Approvals: Includes country-specific (CN) certifications for compliant installations.
• Shipping Weight: Approximately 1.5 kg.

Electrical Characteristics & Wiring

• Center Conductor Resistance: 0.220 Ω/m (0.067 Ω/ft)
• Shield Resistance: 0.066 Ω/m (0.020 Ω/ft)
• Capacitance: 69.9 pF/m (21.3 pF/ft) typical.
• Recommended Field Wiring: Use shielded triad cable between 0.2 to 1.5 mm² (16-24 AWG).
• Maximum Cable Distance: The total run from sensor to monitor must not exceed 305 meters (1,000 feet).

Frequently Asked Questions (FAQ)

• Q: What is FluidLoc cable technology?
  A: FluidLoc is a specialized Bently Nevada cable design that improves performance and longevity. It enhances the cable's resistance to environmental factors for more reliable signal transmission.
• Q: Does this "06" model have armor?
  A: No. The "06" suffix indicates a FluidLoc cable without stainless steel armor, prioritizing flexibility and the benefits of the FluidLoc construction.
• Q: What does the "CN" approval mean for installation?
  A: The CN marking shows the cable meets specific technical standards required for use in certain countries, facilitating regulatory compliance for your project.
• Q: How critical is the total sensor length note?
  A> It is very important. The system is calibrated for a specific total electrical length. The extension cable plus probe length must equal this specified Proximitor Sensor length for accurate measurements.
• Q: What field wiring should I use with this cable?
  A: For best results, use a shielded triad cable with a cross-section between 0.2 and 1.5 mm² (16 to 24 AWG) for connections to the monitoring hardware.

Download the official system datasheet for wiring diagrams and full specifications: 3300 XL NSv Proximity Transducer System Datasheet - 147385.