3300 XL 8mm Probe Bently Nevada 330101-15-48-10-02-00

Bently Nevada 330101-15-48-10-02-00 3300 XL Proximity Probe

The 330101-15-48-10-02-00 is an 8mm proximity probe from the Bently Nevada 3300 XL series. This new, original probe features a longer unthreaded section for specific mounting applications in industrial machinery.

Core Technical Specifications

• Brand: Bently Nevada
• Model & Series: 3300 XL 8mm Proximity Probe
• Part Number: 330101-15-48-10-02-00
• Condition: New & Original in Factory Packing
• Thread Type: 3/8-24 UNF (Without Armor)
• Unthreaded Length: 1.5 in (Option 15)
• Overall Case Length: 4.8 in (Option 48)
• Total Cable Length: 1.0 metre / 3.3 feet (Option 10)
• Connector Type: Miniature Coaxial ClickLoc Connector (Option 02)
• Cable Type: Standard Cable
• Agency Approvals: Not Required (Option 00)
• Factory Warranty: 12 Months
• Sensitivity: -200 mV/mil (-7.87 V/mm) typical
• Linear Range: 10 to 90 mils (0.25 to 2.3 mm)
• Operating Temperature: -40°F to +350°F (-40°C to +177°C) probe tip

Probe Features & Design

• 8mm diameter sensing tip for precise measurement of shaft vibration and position.
• Long 1.5-inch (38.1mm) unthreaded length allows the probe to reach through deeper mounting bosses or insulation.
• Overall case length of 4.8 inches provides structural integrity for extended installations.
• 1.0-meter standard cable offers reliable connectivity in non-hazardous, general industrial environments.
• Miniature coaxial ClickLoc connector ensures a secure, vibration-resistant, and tool-less connection.
• Supplied as new and original with a full 12-month manufacturer's warranty.

Installation & Compatibility

• Designed for use with Bently Nevada 3300 XL and compatible monitoring systems.
• Mount using the 3/8-24 UNF thread into a properly tapped and cleaned hole.
• The long unthreaded section requires careful calculation of the final probe tip-to-target gap.
• Route the 1.0-meter cable neatly, using cable ties and strain relief as needed.
• Connect the ClickLoc connector firmly to the mating receptacle on the monitoring system.
• After installation, perform a system check to verify signal output and gap voltage.

Packaging & Shipping Details

• The probe is supplied in sealed, original Bently Nevada factory packaging.
• Includes the 8mm probe with integrated 1.0m cable and ClickLoc connector.
• International shipping via FedEx, UPS, DHL with full tracking and insurance.
• Packaging is designed to protect the probe during transit and storage.

Frequently Asked Questions

• When is a long unthreaded length probe needed? When mounting through thick housing walls, insulation, or when a specific standoff distance from the mounting surface is required.
• What is the difference between standard and FluidLoc cable? Standard cable is for general use; FluidLoc has added protection against fluid ingress into the connector.
• Can this probe be used in hazardous areas? This specific variant (Option 00) does not carry ATEX/IECEx certifications and is for use in non-hazardous locations only.
• What power supply is needed? It requires a -24V DC supply from a compatible 3300 XL proximitor or monitor.
• How do I set the gap with a long unthreaded section? Use the overall case length and mounting thread depth to calculate the final probe tip position relative to the target.

For technical support or to purchase the Bently Nevada 330101-15-48-10-02-00, please contact us.

Contact: Email sales@nex-auto.com or WhatsApp +86 153 9242 9628.

Partner: NexAuto Technology Limited

© 2026 AutoNex Controls Limited. All rights reserved.