Bently Nevada 330903-00-04-70-01-05 NSv Proximity Probe Sensor

มีสินค้าในสต็อก (15 ชิ้น) พร้อมจัดส่งแล้ว

ผู้ขาย:
Bently Nevada
ประเภท:
Probes
Country of Origin:
USA
Dimensions:
25*25*4cm
Weight:
150 g
แท็ก: 3300 nsv proximity probes , Proximity probes

จำนวน

Bently Nevada 3300 NSv Proximity Probe: Precision Model 330903-00-04-70-01-05

Complete Suffix Configuration

330903: Base model, M8 x 1 thread, unarmored cable
-00: No threaded case extension (0mm)
-04: 40 mm case length
-70: 7.0 meters (23 feet) total system length
-01: Small ClickLoc connector with protector, standard FEP cable
-05: Multi-region certification (ATEX, IECEx, CSA)

Technical Specifications

Brand & Model: Bently Nevada 330903-00-04-70-01-05
Linear Range: 0.25 mm to 1.75 mm (10 to 70 mils), optimal gap at 1.0 mm (40 mils)
Sensitivity: 7.87 V/mm (200 mV/mil) ±12.5% / -20%
Accuracy: ±0.06 mm (±2.3 mils)
Cable Type: 75 ohm coaxial, 7.0 m FEP insulation, non-armored
Probe Resistance: 5.9 ±0.9 ohm
Cable Resistance: 0.220 ohm/m (center), 0.066 ohm/m (shield)
Temperature Range: -52°C to +177°C (-62°F to +351°F)
Interference Rejection: Shielded coaxial design with 75 ohm impedance

Resource: System Datasheet

Download the official 3300 XL NSv datasheet for full system specifications:
3300 XL NSv Proximity Transducer System Datasheet - 147385.pdf

Frequently Asked Questions

Is the 330903-00-04-70-01-05 brand new or refurbished?
Every 330903-00-04-70-01-05 unit is 100% new, factory-sealed, and sourced directly from Bently Nevada authorized channels.
Can I use this probe with my existing 3300 RAM system?
Yes. The 3300 NSv series maintains full mechanical and electrical interchangeability with older 3300 RAM proximity probes.
What extension cable length works with this probe?
The system supports up to 305 meters (1000 feet) of 3-conductor shielded extension cable without performance loss.
Does this probe include the driver or extension cable?
This item includes the probe only. You need a compatible Bently Nevada Proximitor driver and extension cable to form a complete transducer system.
What is the difference between suffix -01 and -02?
Suffix -01 provides the small ClickLoc connector with cable protector; -02 uses a large ClickLoc. The 330903-00-04-70-01-05 uses the compact connector suitable for tight installations.