330901-22-90-10-01-05 Bently Nevada NSv Probe 3300 XL 9.0 Case

มีสินค้าในสต็อก (21 ชิ้น) พร้อมจัดส่งแล้ว

ผู้ขาย:
Bently Nevada
ประเภท:
simple
Country of Origin:
USA
Dimensions:
25*25*5cm
Weight:
500 g
แท็ก: 3300 nsv probe , Probe

จำนวน

330901-22-90-10-01-05 Bently Nevada 3300 XL NSv Proximity Probe

Mechanical Specifications & Extended Case Design

The 330901-22-90-10-01-05 features a 9.0-inch case length (Option 90) for reaching deep mounting holes. It includes a 2.2-inch unthreaded section (Option 22) for optimal tip alignment during installation.
We equip this Bently Nevada probe with a ClickLoc connector with protector (Option 01) and standard 75 Ω coaxial cable. The FEP insulation provides excellent chemical and temperature resistance.
Maximum thread engagement measures 0.375 inches. We recommend installing with 5.1 N·m (45 in·lb) torque, never exceeding 7.3 N·m (65 in·lb).
The probe weight ranges from 14 to 150 grams (0.5 to 5.3 oz) depending on configuration. The Viton O-ring provides reliable pressure sealing.

Electrical Performance & Signal Characteristics

We engineer the 330901-22-90-10-01-05 for precise measurement with 4.2 Ω ±0.5 Ω resistance per meter of cable at 20°C. This ensures consistent signal transmission.
The 75 Ω coaxial cable maintains controlled impedance throughout the 1.0 meter length (Option 10). FEP insulation provides dielectric stability across the temperature range.
This NSv probe operates in extreme temperatures from -52°C to +177°C, with identical storage temperature capabilities. This suits turbine and compressor applications.
The ClickLoc connector ensures secure mating with extension cables while protecting against vibration-induced disconnection. The protector adds mechanical robustness.

Model Number Breakdown

22 — Unthreaded length: 2.2 inches for tip alignment
90 — Case length: 9.0 inches for deep reach applications
10 — Cable length: 1.0 meter standard configuration
01 — ClickLoc connector with protector, standard cable
05 — Multiple safety approvals for global use

Frequently Asked Questions

Q: What applications benefit from the 9.0-inch case length?
A: The 330901-22-90-10-01-05 suits machines with thick bearing housings or where deep mounting holes require extended probe reach.
Q: Does this probe include hazardous area certifications?
A: Yes, Option 05 provides multiple safety approvals including ATEX and IECEx for installation in hazardous locations.
Q: What is the recommended gap setting for this probe?
A: We recommend setting the initial gap between 0.5 mm and 1.5 mm for optimal linear range and sensitivity.
Q: Can I use this with existing 3300 XL extension cables?
A: Yes, the ClickLoc connector on this 330901-22-90-10-01-05 mates with all standard 3300 XL extension cables.
Q: What target materials work best with this sensor?
A: This NSv probe requires ferromagnetic target materials with proper electrical conductivity for accurate measurements.