330881-28-00-165-07-02 Bently Nevada Proximity Transducer

มีสินค้าในสต็อก (17 ชิ้น) พร้อมจัดส่งแล้ว

ผู้ขาย:
Bently Nevada
ประเภท:
Proximity Transducer
Country of Origin:
USA
Dimensions:
80*15*10cm
Weight:
1440 g
แท็ก: Proximity transducer

จำนวน

330881-28-00-165-07-02 Bently Nevada PROXPAC XL Proximity Transducer

Key Technical Specifications

Brand: Bently Nevada
Model: 330881-28-00-165-07-02
Product Type: PROXPAC XL Proximity Transducer
Made in: U.S.A.
Probe Type: 3300 XL 8 mm probe with Multiple Approvals
Standoff Adapter: None (B dimension = 00)
Probe Penetration: 165 mm (C dimension)
Fittings: One PG21 x M20 fitting and two plugs
Mounting Thread: 3/4-14 NPT
Measurement Range: 0.25 mm to 2.3 mm (10 to 90 mils)
Frequency Response: 0 to 10 kHz (+0, -3 dB) with 305 m field wiring
Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) ±5%
Deviation from Best Fit Straight Line (DSL): ±0.025 mm (±1 mil) at 0°C to +45°C
Resolution: Equivalent to 0.025 mm linearity error
Probe Temperature Range: -51°C to +177°C (-60°F to +350°F)
Housing Rating: IP66 (BASEEFA certified)
Probe Tip Material: Polyphenylene Sulfide (PPS)
Probe Case Material: AISI 304 stainless steel
Cable Type: 1 m triaxial, FEP insulated
Connector: Gold-plated brass ClickLoc
Probe Tensile Strength: 330 N (75 lb) maximum
Housing Material: UV-resistant glass-reinforced PPS with conductive fibers
Sleeve & Retaining Chain Material: AISI 304 stainless steel
Outer Sleeve & Retaining Screws: AISI 303 stainless steel
Sleeve O-Ring Material: Neoprene
Grounding Liner & Retaining Plate: AISI 304 stainless steel
Vibration Isolation Material: Extra soft cellular silicone
Lid Label Material: Gloss radiant white polyester
Housing Strength: Supports 912 N (205 lbf) at 38 mm from unsupported end
Impact Strength: 4 Joules at -39°C and +115°C (BASEEFA), 7 Joules at room temp (CSA)
Total System Weight: 1.44 kg (3.2 lbm) typical
Power Requirement: -17.5 Vdc to -26 Vdc at 12 mA max
Supply Sensitivity: Less than 2 mV output change per 1V input change
Output Resistance: 50 Ω
Field Wiring: 0.2 to 1.5 mm² (16-24 AWG), 3-conductor shielded triax
Maximum Field Wiring Length: 305 m (1000 feet)
Recommended Gap Setting: 1.27 mm (50 mils)
Minimum Target Size: 15.2 mm (0.6 in) diameter flat target
Minimum Shaft Diameter: 50.8 mm (2.0 in)

Frequently Asked Questions (FAQ)

Can this probe work below -34°C? No, exposing the probe to temperatures below -34°C may cause premature failure of the pressure seal.
What power supply does the 330881-28-00-165-07-02 need? This device requires -17.5 Vdc to -26 Vdc without barriers. Use -23 Vdc to -26 Vdc with barriers for proper operation.
How long can I run the field wiring? You can run up to 305 meters (1000 feet) of 3-conductor shielded triax cable between the sensor and monitor.
What happens if I supply a more positive voltage than -23.5 Vdc? A more positive voltage than -23.5 Vdc will reduce the linear range of the system.
Is the housing impact resistant for harsh environments? Yes, BASEEFA certified the housing for 4 Joule impacts at -39°C and +115°C. CSA verified 7 Joule impacts at room temperature.
What temperature class does this probe support? The probe supports T1 through T5 for EPL Ga/Gc, and multiple temperature ratings for EPL Dc depending on ambient conditions.
Do you have this model in stock right now? Yes, we have the 330881-28-00-165-07-02 in stock and ready for immediate orders.
Can I download a product manual? Please email sales@nex-auto.com to request the PDF manual for the PROXPAC XL transducer.