IC697MDL240 GE Fanuc Emerson | Series 90-70

IC697MDL240 Discrete Input Module for Series 90-70

Electrical Specifications

• Input Voltage Rating: 120 V AC
• Number of Points: 16 isolated inputs
• Input Filter Delay: 20 milliseconds
• Input Current: 10 mA per point
• Leakage Current: ≤4 mA off-state
• Maximum Switching Rate: 20 Hz
• Power Dissipation: 1.2 Watts total

Environmental Ratings

• Operating Temperature: 0°C to +55°C
• Storage Temperature: -20°C to +85°C
• Humidity Range: 5% to 95% non-condensing
• Vibration Resistance: Meets industrial standards
• Noise Immunity: High noise rejection capability
• Isolation Rating: Channel-to-channel isolation

Installation Steps

• Insert the module into any available Series 90-70 rack slot
• Secure the locking latch firmly to the backplane connector
• Wire 120V AC input signals to the terminal points
• Use GE programming software to map I/O addresses
• Check status LEDs for input on/off indication
• Verify proper operation through system diagnostics

Application Compatibility

• GE and Emerson Series 90-70 programmable controllers
• Two-wire and three-wire proximity switch inputs
• Limit switches and mechanical position sensors
• Selector switches and control panel pushbuttons
• Windows and DOS programming tools via SNP
• Ethernet-based configuration and monitoring systems

Common Questions

What input voltage does this module accept?

The IC697MDL240 accepts 120V AC input signals. This matches standard industrial control voltage levels.

How many input points are available?

This module provides sixteen completely isolated input points. Each point handles AC voltage signals independently.

What is the purpose of the 20ms filter?

The 20 millisecond filter eliminates contact bounce and electrical noise. This ensures clean signal recognition for reliable operation.

What types of switches can I connect?

You can connect limit switches, pushbuttons, selector switches, and proximity sensors. Both two-wire and three-wire devices are compatible.

How do I monitor input status?

Each input point has a corresponding status LED. The PLC programming software also shows real-time input status.

What is your return policy?

We offer a 30-day return period for all products. Contact our sales team for return authorization and instructions.

For volume pricing and technical support, reach out to our automation experts: sales@nex-auto.com