GE Fanuc IC695CMM002 RX3i Communication Module

GE Fanuc IC695CMM002 RX3i Dual-Port Serial Communication Module

Technical Specifications

• Brand: GE Fanuc
• Model: IC695CMM002
• Series: PACSystem RX3i
• Product Type: Serial communications module
• Number of Ports: Two independent RJ-45 serial ports
• Supported Protocols: MODBUS, DNP3, CCM, Serial I/O
• Selectable Port Modes: RS-232, RS-422, RS-485
• Baud Rates: 1200 to 115200 bps
• Current Draw: 0.7A @ 3.3VDC, 0.115A @ 5VDC
• Port-to-Port Isolation: 500VDC continuous, 710VDC for 1 minute
• Port-to-Backplane Isolation: 250VAC continuous, 1500VAC for 1 minute
• Maximum Modules per Backplane: 6 modules
• Operating Temperature: 0 to 60°C
• Flow Control: Full-duplex default, half-duplex with firmware 1.32+
• Hot-swap Support: Yes, for online replacement
• Input Impedance: >96 kΩ for RS-485/422
• Serial Parameters: Configurable parity, data bits, stop bits
• LED Indicators: Module OK, Port Fault, port status

Frequently Asked Questions

What protocols does the IC695CMM002 support?

• The IC695CMM002 supports MODBUS, DNP3, CCM, and Serial I/O protocols. This flexibility allows connection to various industrial devices. You can configure each port independently.

How many serial ports does this module have?

• This module provides two independent serial ports. Both ports use standard RJ-45 connectors. You can configure each port with different settings and protocols.

What is the isolation rating between ports?

• The ports feature 500VDC continuous isolation and 710VDC for one minute. This high isolation protects against ground loops and noise in industrial environments.

How many modules can I install in one system?

• You can install up to six IC695CMM002 modules per backplane. This provides twelve total serial ports for extensive communication needs in complex systems.

Does this module support hot-swapping?

• Yes, the IC695CMM002 fully supports hot-swap capability. You can replace or add modules while the system remains operational. This feature minimizes system downtime during maintenance.

What are the power requirements?

• The module draws 0.7A at 3.3VDC and 0.115A at 5VDC. These low power requirements make it suitable for various system configurations without excessive power consumption.

Contact: sales@nex-auto.com