Bently Nevada 330905-05-13-05-02-00 Vibration Probe | 3300 NSv

Bently Nevada 330905-05-13-05-02-00: Precision 3300 NSv Vibration Probe for Critical Machinery

Full Suffix Configuration: 330905-05-13-05-02-00

• Brand: Bently Nevada
• Model: 3300 NSv Proximity Transducer
• Base Part: 330905 - 5mm NSv probe
• -05: 50mm unthreaded smooth tip
• -13: 130mm case length
• -05: 0.5 meter integral cable
• -02: ClickLoc quick-release connector
• -00: Standard hazardous area approvals

Critical Technical Specifications

• Measurement Range: 1.5 mm linear range. This provides ample coverage for most journal bearings.
• Accuracy: ±0.06 mm throughout the full temperature range. No recalibration needed.
• Frequency Response: 0 to 10 kHz. It captures both static position and dynamic motion.
• Sensitivity: 7.87 V/mm nominal. This factory-calibrated value ensures consistent output.
• Linearity: ±0.025 mm from best-fit straight line. Minimal deviation across the range.
• Resolution: 0.001 mm. The system detects minute shaft movements.
• Operating Temperature: -52°C to +177°C for the probe. Electronics handle -35°C to +65°C.
• Environmental Tolerance: Viton O-ring seals resist oil and moisture ingress.
• Chemical Resistance: FEP cable coating and PPS tip resist harsh lubricants and solvents.
• RFI/EMI Immunity: Shielded construction prevents electrical interference from nearby equipment.

Frequently Asked Questions

• Is this probe compatible with my 3300 RAM monitor? Yes, the 330905-05-13-05-02-00 directly replaces older 190 probes. It works with all 3300 series extension cables and systems.
• What makes the NSv version different? NSv stands for "New Standard v." It offers better chemical resistance than classic 3300 probes. The PPS tip withstands aggressive steam turbine environments.
• Can I use this probe with a target smaller than 13mm? No, minimum target diameter is 13mm. Smaller targets cause nonlinear readings and amplitude errors.
• Is this item new or refurbished? We supply genuine Bently Nevada inventory. Every unit is brand new and factory-sealed.
• What happens if I exceed the 177°C limit? The tip may degrade. Continuous exposure above 177°C damages the internal coil assembly.
• Do I need a separate driver for this probe? Yes, the 3300 NSv requires a 3300 RAM driver card. The probe connects via standard ClickLoc interface.

Technical Documentation

• For complete specifications and system diagrams, download the official Bently Nevada datasheet: 3300 XL NSv Proximity Transducer System Datasheet - 147385
• This PDF contains full electrical data, target material effects, and accessory part numbers.

Partner NexAuto Technology Limited: https://www.nex-auto.com/

Contact Information Inquiries: sales@nex-auto.com | +86 153 9242 9628