Bently Nevada 330101-30-49-10-12-05 8mm Proximity Probe

Bently Nevada 330101-30-49-10-12-05 3300 XL Proximity Probe

The 330101-30-49-10-12-05 is a precision 8mm proximity transducer from the Bently Nevada 3300 XL series. Designed for critical machinery monitoring, it features robust construction for challenging industrial environments.

Core Technical Specifications

• Brand: Bently Nevada
• Model & Series: 3300 XL 8mm Proximity Probes
• Part Number: 330101-30-49-10-12-05
• Probe Diameter: 8 mm
• Unthreaded Length: 3.0 mm (Option 30)
• Overall Case Length: 4.9 mm (Option 49)
• Total Cable Length: 1.0 metre / 3.3 feet (Option 10)
• Connector Type: Miniature Coaxial ClickLoc Connector (Option 12)
• Cable Type: FluidLoc Cable (Fluid-Resistant)
• Agency Approvals: CSA, ATEX, IECEx (Option 05)
• Electrical Output: -200 mV/mm Sensitivity (Typical)
• Linear Range: 0.25 to 2.3 mm (10 to 90 mils)
• Operating Temperature: -40°C to +150°C (Probe Tip)
• Frequency Response: 0 to 10 kHz

Probe Features & Design

• 8mm probe tip provides accurate vibration and position measurement for rotating shafts.
• Precise 3.0mm unthreaded length ensures proper installation and gapping.
• Compact 4.9mm case length is ideal for space-constrained mounting locations.
• FluidLoc cable prevents fluid ingress, maintaining signal integrity in wet conditions.
• ClickLoc connector offers a secure, tool-less connection for quick installation.
• ATEX, IECEx, and CSA certifications permit use in hazardous and explosive atmospheres.
• Wide operating temperature range ensures reliability in extreme environments.

Installation & Compatibility

• Compatible with Bently Nevada 3300 XL and compatible monitoring systems.
• Mount in a clean, prepared 8mm hole using appropriate mounting hardware.
• Set the initial gap between the probe tip and target shaft according to system requirements.
• Route the 1.0m FluidLoc cable securely, avoiding sharp bends and potential damage points.
• Ensure the ClickLoc connector is fully engaged with the mating system connector.
• Verify system calibration and signal output after installation is complete.

Packaging & Shipping Details

• The probe is supplied as a new, original unit in factory-sealed protective packaging.
• Includes the proximity probe with integrated 1.0m FluidLoc cable and ClickLoc connector.
• International shipping via FedEx, UPS, DHL with full tracking and insurance.
• Packaging includes desiccant to protect against moisture during storage and transit.

Frequently Asked Questions

• What is the typical application for this probe? Monitoring radial vibration and axial position on turbines, compressors, pumps, and fans.
• What does the "FluidLoc" designation mean? It indicates the cable is specially constructed to resist wicking of oils and other fluids into the electrical core.
• Can this probe be used in explosive atmospheres? Yes, its ATEX and IECEx certifications allow installation in Zone 0, 1, and 2 hazardous areas.
• What is the required power supply? Typically -24V DC from the compatible 3300 XL monitor or proximitor.
• How do I determine the correct installation gap? Refer to the machinery manual or Bently Nevada guidelines; typical gaps range from 0.8 to 1.5 mm.

For detailed certification files or to order the Bently Nevada 330101-30-49-10-12-05, contact us.

Contact: Email sales@nex-auto.com or WhatsApp +86 153 9242 9628.

Partner: NexAuto Technology Limited

© 2026 AutoNex Controls Limited. All rights reserved.