GE IS215UCVDH7AM Mark VI UCVD Input Module Board

IS215UCVDH7AM Input Module Board – GE Mark VI Speedtronic Series

Key Technical Specifications

• Brand: GE Industrial Systems
• Model: IS215UCVDH7AM
• Category: Input Module Board
• Series: Mark VI Speedtronic
• Part Number: IS215UCVDH7AM
• Functional Acronym: UCVD
• Functional Description: Input Module Board
• PCB Coating Type: Conformal Coating
• Functional Revision 1: A
• Functional Revision 2: M
• Group: Group 7 Mark VI Series Grouping
• Manufacturer Location: Salem, Virginia, USA
• Availability: In Stock

Functional Description

• The IS215UCVDH7AM belongs to the Mark VI Speedtronic turbine control system family.
• It exists as a modified version of the IS215UCVDH7 parent circuit board.
• Two functional revisions, A and M, set this model apart from its parent board.
• GE Industrial Systems produced this board at its Salem, Virginia factory.
• The board carries a conformal coating for hardware protection.
• This coating applies chemically as a thin layer over the PCB assembly.
• The functional product number reveals the UCVD acronym and group 7 grouping.

Diagnostic LED Indicators

• ACTIVE: Shows active controller status on the front faceplate.
• BMAS: Indicates bus master status for system communication.
• SLOT1: Displays slot 1 identification status.
• ENET: Shows Ethernet communication status.
• SYS: Indicates overall system status.
• BSLV: Displays bus slave status for communication diagnostics.
• Ten H or L LEDs: Display possible runtime error codes.

Ports and Connectivity

• Monitor Port: Designated for General Electric use only.
• Mouse Port: Designated for General Electric use only.
• Keyboard Port: Designated for General Electric use only.
• COM1 RS-232C: Supports initial controller setup procedures.
• COM2 RS-232C: Supports serial communications tasks.
• Ethernet Port: Deployed for UDH or unit data highway communications.
• ISBus Drive LAN Ports: Documented as unused in original manuals.

Hardware Protection

• The conformal coating envelops hardware components across the PCB assembly.
• This chemically-applied coating protects against environmental exposure.
• The thin protective layer preserves signal integrity and component reliability.
• Conformal coating suits turbine control environments with demanding conditions.

Installation Guide

• Power down the VME rack before you begin the installation procedure.
• Insert the board into the designated slot with both hands.
• Push the top and bottom levers gently to seat the edge connectors.
• Tighten the captive screws at the top and bottom of the front panel.
• Power up the rack after the board sits securely in place.
• Check the diagnostic LEDs on the front faceplate for proper initialization.
• Connect COM1 and COM2 RS-232C ports for controller setup and serial communications.
• Use the Ethernet port for UDH or unit data highway communications.

Packaging List

• 1 x IS215UCVDH7AM Input Module Board
• 1 x Anti-static protective bag
• 1 x Protective foam or shock-absorbing packaging
• 1 x Product label with model and serial information
• Shipping method: FedEx, UPS, or DHL

FAQ

• Q: What series does the IS215UCVDH7AM belong to?
  A: It belongs to the Mark VI Speedtronic series from GE Industrial Systems.
• Q: What functional revisions does this board carry?
  A: The board carries two functional revisions, rated A and M.
• Q: What type of PCB coating does the board use?
  A: It uses conformal coating for hardware protection.
• Q: How many diagnostic LEDs does the board have?
  A: It has ACTIVE, BMAS, SLOT1, ENET, SYS, and BSLV LEDs plus ten H or L error code LEDs.
• Q: What are the COM1 and COM2 ports used for?
  A: COM1 supports initial controller setup, and COM2 supports serial communications.
• Q: What is the Ethernet port used for?
  A: It supports UDH or unit data highway communications.
• Q: Is the board in stock?
  A: Yes, we have the board in stock and ship within 5 days.
• Q: What is the return policy?
  A: We support returns within 30 days.
• Q: What shipping methods do you use?
  A: We use common carriers such as DHL, FedEx, and UPS.
• Q: Is the product new and original?
  A: Yes, the product is brand new and original.

Contact Information

• Inquiries: sales@nex-auto.com
• Phone: +86 153 9242 9628
• Partner: NexAuto Technology Limited

Contact Information Inquiries: sales@nex-auto.com or +86 153 9242 9628.