ABB SC510 3BSE003832R1 Carrier Module for AC 460/800F I/O

ABB SC510 Submodule Carrier (Without CPU)

The SC510 is an I/O interface carrier module for the ABB AC 460 and AC 800F controller families. It acts as a gateway, allowing the connection of various I/O and communication submodules to the controller's bus system.

Core Product Information

• Brand: ABB
• Product ID / Article Number: 3BSE003832R1
• ABB Type Designation: SC510
• Catalog Description: SC510 Submodule Carrier without CPU
• Product Type: Communication / I/O Carrier Module
• Submodule Capacity: Supports 2 Personality Modules (Submodules)

Physical Specifications

• Product Net Dimensions (L x W x H): 288 mm x 486 mm x 22.5 mm
• Product Net Weight: 0.67 kg
• HS Code: 853890
• Customs Tariff Number: 85389091

Electrical & Thermal Data

• Power Consumption (from backplane):
  • 5 Volts: 1.8 A
  • 24 Volts: 0.54 A
• Cooling Load (Typical): 75 BTU/H
• Number of Batteries: 0

Compliance & Environmental

• RoHS Status: Compliant with EU Directive 2011/65/EU
• WEEE Category: 5 (Small Equipment - No external dimension > 50 cm)
• SCIP (Sweden): 64ca723a-0669-4eec-a128-1d20dd256d13

Key Features & Supported Submodules

• Provides two slots for installing Personality Modules (PMs).
• Enables connectivity to:
  • ABB S800 I/O modules (via S800 I/O Link)
  • ABB S100 I/O modules
  • TRIO modules (for specific device integration)
  • Multi-Vendor Interface (MVI) modules for third-party system integration
• Acts as an interface between the controller's internal bus and external I/O networks.
• Typically part of a larger controller hardware kit (e.g., with PM510V16 CPU and MB510 memory).

Included In Kits (Examples)

• 3BSE011302R1 - ACMHWV16 HW (PM510V16, SC510, MB510)
• 3BSE016433R1 - Kit
• 3BSE016434R1 - Kit
• 3BSE016440R1 - Kit

Installation & System Design

• Installs into a slot within an AC 460 or AC 800F controller rack.
• Personality Modules (submodules) are plugged into the carrier's two slots to define its function.
• Power requirements (5V/1.8A, 24V/0.54A) must be considered when sizing the controller's power supply.
• The cooling load (75 BTU/H) should be factored into cabinet thermal management.
• Configuration of the connected I/O is performed in the system engineering software (e.g., Control Builder).

For kit configurations or to order the ABB SC510 (3BSE003832R1) carrier module, contact our technical sales team.

Contact: Email sales@nex-auto.com or WhatsApp +86 153 9242 9628.

Partner: NexAuto Technology Limited

© 2026 AutoNex Controls Limited. All rights reserved.