330101-00-55-10-02-05 3300 XL 8 mm Proximity Probes - Bently Nevada

Bently Nevada 330101-00-55-10-02-05 8 mm Probe | 3300 XL ATEX/IECEx

Core Specifications

• Brand: Bently Nevada; Series: 3300 XL; Model: 330101-00-55-10-02-05
• Probe diameter: 8 mm; Thread: 3/8-24 UNF; Case length: 5.5 in
• Linear range: 2.3 mm (90 mils); Deviation: ±0.025 mm (±1 mil)
• Cable length: 1 m; Capacitance: 69.9 pF/m ±3 % for stable signal
• Scale factor: 7.87 V/mm ±5 % when paired with 3300 XL driver

Performance & Safety

• Temperature rating: –52 °C to +218 °C (ETR version) at probe tip
• Pull strength: 330 N via CableLoc moulding; TipLoc adds 25 % bond strength
• Pressure seal: Viton O-ring for 10 bar static; IP68 with FluidLoc option
• Frequency response: 0–10 kHz ±1 dB; Field wiring up to 305 m
• Certifications: CSA, ATEX, IECEx for Zone 1/21 and Zone 2/22 areas

Physical & Material Data

• Case material: AISI 303/304 stainless steel; Weight: 323 g/m (11.4 oz)
• Tip encapsulation: PPS thermoplastic bonded to stainless shell
• Connector: ClickLoc miniature coax; Gold-plated contacts resist corrosion
• Minimum target: 15 mm diameter; AISI 4140 steel standard
• Mounting torque: 20 N·m on 3/8-24 jam-nut; Anti-seize recommended

Installation Notes

• Set gap near –9 Vdc (≈ 1.27 mm) for optimum radial vibration linearity
• Keep cable away from >100 A lines to hold noise below 50 mV pp
• Use only 3300 XL extension cables; mix no other series to keep scale
• FluidLoc suffix –FL required for oil-tight duty; order at purchase
• Verify ATEX/IECEx label before install in hazardous zone

Packaging & Shipping

• Box holds one 330101-00-55-10-02-05 probe with 1 m cable
• Stainless mounting nut, lock washer and tip protector included
• Anti-static foam cushions unit for FedEx, UPS or DHL transit
• Ships same day from USA and EU stock; no export license needed
• Calibration record stored under serial number; paper not in box

FAQ

• Q: Does the probe work with a 7200 driver? A: No, use only 3300 XL drivers.
• Q: Is FluidLoc included? A: FluidLoc is optional; add –FL to model code.
• Q: Can I bury the cable in conduit? A: Yes, maintain 50 mm bend radius.

Need the full calibration chart and ATEX certificate? Download the PDF: 3300 XL 8 mm Proximity Transducer System Datasheet – 141194. For price and stock, write to sales@nex-auto.com now.