330101-00-43-15-02-00 Bently Nevada | 3300 XL 8mm Probe

Bently Nevada 330101-00-43-15-02-00 – 3300 XL 8 mm Probe Overview

• Brand & Model: Bently Nevada 330101-00-43-15-02-00, 3300 XL 8 mm probe family.
• Thread Type: 3/8-24 UNF thread, no armor version for flexible installation in tight spaces.
• Unthreaded Length Option: 00 = 0.0 inches for standard tip exposure.
• Overall Case Length Option: 43 = 4.3 inches for extended probe body reach.
• Total Length Option: 15 = 1.5 meters (4.9 feet) overall cable length.
• Connector & Cable Type: 02 = miniature coaxial ClickLoc connector with standard cable.
• Extra Option Code: 00 = not required, no special customization added.

Technical Specifications – Core Electrical & Mechanical Data

• Nominal DC Resistance (RPROBE): 7.73 ± 0.50 Ω measured from center conductor to outer conductor for 1.5m probe length.
• Extension Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical value.
• Field Wiring Recommendations: Use 0.2 to 1.5 mm² (16-24 AWG) 3-conductor shielded triad cable. Max length 305 meters (1000 feet) to the 3300 XL Proximitor Sensor.
• Linear Range: 2 mm (80 mils) begins at 0.25 mm (10 mils) from target. Full range from 0.25 to 2.3 mm (10 to 90 mils). Output voltage spans -1 to -17 Vdc.
• Recommended Gap for Radial Vibration: Set to -9 Vdc which equals approximately 1.27 mm (50 mils).
• Incremental Scale Factor (ISF) – Standard 1m or 5m System: 7.87 V/mm (200 mV/mil) ±5% including interchangeability error over 0°C to +45°C.
• Standard 9 meter System ISF: 7.87 V/mm (200 mV/mil) ±6.5% under same temperature conditions.
• Extended Temperature Range (ETR) ISF for 5 & 9 meter Systems: 7.87 V/mm (200 mV/mil) ±6.5% from 0°C to +45°C.
• Deviation from Straight Line (DSL) – Standard 1m System: Less than ±0.025 mm (±1 mil) at 0°C to +45°C.
• Standard 9m or ETR Systems DSL: Less than ±0.038 mm (±1.5 mil) within same temperature range.

Material Composition & Environmental Tolerance

• Probe Tip Material: Polyphenylene sulfide (PPS) gives thick encapsulation for the internal coil.
• Probe Case Material: AISI 303 or 304 stainless steel (SST) for high mechanical strength.
• Weight: 323 g/m (11.4 oz) – lightweight and easy to handle during installation.
• Standard Probe Temperature Range (Operating & Storage): -52°C to +177°C (-62°F to +350°F).
• Extended Temperature Range Version: Probe tip tolerates -52°C to +218°C (-62°F to +425°F). Cable and connector handle -51°C to +260°C (-60°F to +500°F).
• Low Temperature Warning: Exposing the probe below –34˚C (-30˚F) may cause early pressure seal failure.
• Pressure Seal Design: Viton® O-ring seals differential pressure between probe tip and case. Probes are not pressure tested before shipment.
• Relative Humidity Robustness: Less than 3% change in Average Scale Factor after 56 days at 93% humidity per IEC 68-2-3 standard.

Frequently Asked Questions (FAQ)

• Q: Is this 330101-00-43-15-02-00 a genuine new original Bently Nevada probe?
  A: Yes, we supply only 100% genuine, new original stock. No clones or used units.
• Q: What is the linear measurement range of this 3300 XL 8 mm probe?
  A: The linear range equals 2 mm (80 mils) starting 0.25 mm from the target surface.
• Q: Can I use this probe in high temperature environments?
  A: Standard version works up to +177°C. Choose extended temperature range for +218°C tip capability.
• Q: Does this model include armor protection on the cable?
  A: No, 330101-00-43-15-02-00 comes without armor for flexible routing inside machinery.
• Q: How long is the total cable length for this product?
  A: Total length option 15 equals 1.5 meters (4.9 feet) with ClickLoc connector.
• Q: What shipping carriers do you use?
  A: We ship using FedEx, UPS, and DHL for worldwide fast delivery.
• Q: How quickly will you ship my order?
  A: We ship all orders within 5 days from our warehouse.
• Q: Can I return this probe if it does not fit my application?
  A: Yes, we offer a 30-day return window. The item must be unused and in original packaging.

For any inquiries about the 330101-00-43-15-02-00 or other Bently Nevada parts, contact us via email at sales@nex-auto.com or WhatsApp at +86 153 9242 9628. We provide fast quotes and global support.

Partner with NexAuto Technology Limited: https://www.nex-auto.com/