Bently Nevada 330904-08-10-50-01-05 3300 NSv Probe

3300 NSv Proximity Probe – Model 330904-08-10-50-01-05

Ordering details decoded

• -08 Unthreaded probe length: 80 mm
• -10 Case length: 100 mm (stainless steel AISI 304)
• -50 Cable length: 5.0 m (16.4 ft) – 75 Ω FEP coaxial
• -01 Connector: ClickLoc miniature coaxial with protective boot, standard FEP cable
• -05 Agency approvals: Multiple global (CSA, ATEX, IECEx)

Electrical & signal characteristics

• Probe resistance: 5.3 ± 0.7 Ω (measured at 5.0 m).
• Cable resistance: center conductor 0.220 Ω/m, shield 0.066 Ω/m.
• Cable capacitance: 69.9 pF/m (typical).
• Linear range: 0.25–1.75 mm (10–70 mils) – recommended gap 1.0 mm (40 mils).
• Scale factor: 7.87 V/mm ±20% (200 mV/mil) over linear range.
• Frequency response: 0–10 kHz, even with total wiring up to 305 m.
• Output signal: –1 to –13 Vdc corresponding to the linear range.

Frequently asked questions

• What is the linear range of the 330904-08-10-50-01-05? It spans 0.25 to 1.75 mm (10–70 mils). Recommended static gap is 1.0 mm (40 mils).
• Can this probe be used in high‑pressure areas? Yes, it withstands up to 10 bar at the probe tip.
• Is the 330904-08-10-50-01-05 compatible with existing Bently Nevada monitors? Absolutely, it works with 3300 NSv systems and most proximitors.
• What type of connector does it use? It uses a ClickLoc miniature coaxial connector with a protective boot – tool‑free and secure.
• Does it come with agency approvals? Yes, it carries multiple global approvals (CSA, ATEX, IECEx) for hazardous locations.
• Where can I download the full datasheet? Use the PDF link below for complete 3300 XL NSv system specifications.

Download the detailed PDF manual: 3300 XL NSv Proximity Transducer System Datasheet – 147385 (includes mounting drawings and full electrical data).

For inquiries or orders: sales@nex-auto.com | WhatsApp: +86 153 9242 9628

Partner with NexAuto Technology Limited : https://www.nex-auto.com/