Bently Nevada 330101-39-63-10-12-05 8mm Proximity Probe

Bently Nevada 330101-39-63-10-12-05 3300 XL Proximity Probe

The 330101-39-63-10-12-05 is a high-performance 8mm proximity probe from the Bently Nevada 3300 XL series. Designed for robust industrial applications, it offers extended mechanical dimensions for specific mounting requirements.

Core Technical Specifications

• Brand: Bently Nevada
• Model & Series: 3300 XL 8mm Proximity Probes
• Part Number: 330101-39-63-10-12-05
• Probe Diameter: 8 mm
• Unthreaded Length: 3.9 mm (Option 39)
• Overall Case Length: 6.3 mm (Option 63)
• Total Cable Length: 1.0 metre / 3.3 feet (Option 10)
• Connector Type: Miniature Coaxial ClickLoc Connector (Option 12)
• Cable Type: FluidLoc Cable (Fluid-Resistant)
• Agency Approvals: CSA, ATEX, IECEx (Option 05)
• Electrical Sensitivity: -7.87 V/mm (-200 mV/mil)
• Linear Measurement Range: 0.25 to 2.3 mm (10 to 90 mils)
• Frequency Response: 0 to 10 kHz
• Operating Temperature Range: -40°C to +150°C (Probe Tip)
• Recommended Gap Voltage: -10 V DC (for a 1.0 mm / 40 mil gap)

Probe Features & Design

• 8mm sensing tip provides accurate measurement of shaft vibration and position.
• Extended 3.9mm unthreaded length offers flexibility for specific installation depths and gap settings.
• 6.3mm overall case length accommodates mounting in standard industrial sensor housings.
• 1.0-meter FluidLoc cable provides a sealed, reliable connection in wet or oily environments.
• ClickLoc connector enables quick, secure, and tool-less mating to monitoring system interfaces.
• Certifications (CSA, ATEX, IECEx) ensure compliance for use in North America and explosive atmospheres globally.
• Wide temperature tolerance guarantees performance in extreme cold or heat.

Installation & Compatibility

• Compatible with Bently Nevada 3300 XL and compatible monitoring systems.
• Install in a clean, machined 8mm mounting hole with appropriate hardware.
• Use the extended unthreaded length to achieve the precise required gap to the target surface.
• Route the 1.0m FluidLoc cable securely, avoiding sharp bends, abrasion, and high-temperature sources.
• Ensure the ClickLoc connector clicks fully into place on the mating connector for a secure link.
• After installation, power the system and verify the gap voltage aligns with calibration settings.

Packaging & Shipping Details

• The probe is supplied as a new, original Bently Nevada product in factory packaging.
• Includes the proximity probe with factory-attached 1.0m FluidLoc cable and ClickLoc connector.
• International shipping via FedEx, UPS, DHL with full tracking and delivery confirmation.
• Packaging is designed to protect the probe's sensitive tip and calibration integrity.

Frequently Asked Questions

• When would I choose this probe with a longer case length? For applications where the probe must mount through a thicker housing or insulation layer before reaching the target.
• What is the advantage of the FluidLoc cable? It prevents fluid ingress that can cause electrical shorts and signal loss, critical in pump or compressor applications.
• Can this probe be used in coal mines or grain silos? Yes, its ATEX/IECEx certification includes groups for explosive dust atmospheres, subject to specific zone ratings.
• What is the typical output signal? A DC voltage proportional to the gap, modulated by an AC voltage representing vibration. For a 1mm gap, expect approx. -10V DC.
• Is a separate proximitor required? Yes, this probe requires a compatible 3300 XL proximitor or monitor to provide power and condition the signal.

For certification details or to order the Bently Nevada 330101-39-63-10-12-05, contact our sales team.

Contact: Email sales@nex-auto.com or WhatsApp +86 153 9242 9628.

Partner: NexAuto Technology Limited

© 2026 AutoNex Controls Limited. All rights reserved.