AI-Tek 70085-1010-415 | High Output Speed Sensor

AI-Tek Instruments Speed Sensor 70085-1010-415

The 70085-1010-415 delivers exceptional performance for critical speed monitoring applications. This AI-Tek Airpax passive sensor generates high-output voltage signals without external power requirements. It provides superior signal strength and reliability in demanding industrial environments.

Technical Specifications

• Part Number: 70085-1010-415
• Sensor Length: 5.50 inches (139.70 millimeters)
• Thread Length: 2.25 inches (57.15 millimeters)
• Output Voltage: 150 volts peak to peak standard
• Guaranteed Output: 22.5 volts peak to peak minimum
• DC Resistance: 120 ohms maximum
• Operating Temperature: -65 to +150 degrees Celsius
• Cable Length: 12 feet (3.66 meters) integrated
• Inductance Value: 25 millihenries typical

Additional Technical Parameters

• Measurement Range: 0 to 30,000 RPM maximum
• Frequency Response: 2 Hz to 12,000 Hz bandwidth
• Thread Specification: 1-14 UNS-2A special thread
• Target Requirements: Magnetic target with 32 teeth
• Installation Gap: 0.6 to 2.2 millimeters optimal
• Response Time: 3 milliseconds maximum
• Housing Material: 17-4PH Stainless Steel
• Ingress Protection: IP68 rated submersible
• Shock Resistance: 100g for 11 milliseconds
• Vibration Resistance: 20g from 10-2000 Hz

Installation Guide

• Mount using 1-14 UNS-2A threaded connection
• Maintain 0.6-2.2mm gap from magnetic target
• Ensure proper IP68 seal engagement
• Route 12-foot cable with proper strain relief
• Verify 32-tooth target compatibility
• Test output signal with high-frequency oscilloscope

Electrical Characteristics

• Power Requirement: None (self-generating)
• Output Type: High-amplitude AC voltage
• Signal Waveform: Clean sinusoidal pattern
• Minimum Load: 5k ohms recommended
• Rise Time: 1.5 milliseconds typical
• Output Linearity: ±1% of full scale

Frequently Asked Questions

• What is the maximum output voltage? 150 volts peak to peak standard output.
• What environmental protection does it have? IP68 rated for submersible applications.
• What is the frequency response range? 2 Hz to 12,000 Hz bandwidth.
• What target specification is required? Magnetic target with 32 teeth optimal.