ABB CI869 Advant Fieldbus 100 Interface | 3BSE049110R1

CI869 AF 100 Fieldbus Communication Interface

The CI869 from ABB enables AC 800M controllers to connect to Advant Fieldbus 100 networks using twisted pair cabling. This robust communication interface provides reliable data exchange in industrial automation environments. It supports both cable redundancy and module redundancy for high-availability applications.

Protocol and Communication Features

• Implements ABB's Advant Fieldbus 100 protocol for industrial networks
• Provides connectivity between AC 800M controllers and other AF 100 stations
• Operates as a slave device on the AF 100 fieldbus network
• Features integrated twisted pair modems for direct cable connection
• Supports data exchange with AC 800M, AC 160, and connectivity servers

Technical Specifications

• Manufacturer: ABB
• Model Number: CI869 (Article 3BSE049110R1)
• Communication Protocol: ABB Advant Fieldbus 100
• Operation Mode: Slave device on fieldbus network
• Transmission Speed: 1.5 Mbit/s high-speed fieldbus communication
• Connection Type: Twisted Pair (TWP) fieldbus cabling
• Maximum CEX Bus Units: 12 modules per controller system
• Power Consumption: 160 mA typical at 24V DC

Redundancy and Reliability Features

• Supports line redundancy for fault-tolerant cable connections
• Enables module redundancy using dual CI869 interfaces
• Provides hot swap capability for maintenance without system shutdown
• Compatible with AC 800M High Integrity safety systems
• Contains integrated CEX-Bus logic and DC/DC power converter

System Integration and Compatibility

• Connects AC 800M controllers to AF 100 fieldbus networks
• Works with AC 100 OPC Server in Connectivity Server environments
• Requires CI527A hardware interface for OPC server connectivity
• Powered by +24V supply through the CEX-Bus connection
• Enables controller to behave as an AF 100 station on the network

Environmental Specifications

• Operating Temperature: +5 to +55 °C (+41 to +131 °F)
• Storage Temperature: -40 to +70 °C (-40 to +158 °F)
• Protection Rating: IP20 according to EN60529, IEC 529
• Corrosion Protection: G3 compliance to ISA 71.04

Certifications and Compliance

• CE marked for European market compliance and safety
• WEEE compliance: DIRECTIVE/2012/19/EU for electronic waste
• Designed for industrial automation environments and applications

Physical Dimensions

• Width: 59 mm (2.3 inches)
• Height: 185 mm (7.3 inches)
• Depth: 127.5 mm (5.0 inches)
• Weight: 700 g (1.5 pounds) including base unit

Installation and Configuration

• Mount the module on standard AC 800M controller baseplate
• Connect twisted pair fieldbus cables to the designated connectors
• Configure redundancy settings for cables and modules as required
• Verify proper +24V power supply through CEX-Bus connection
• Set up AF 100 network parameters for slave device operation
• Test communication with other AF 100 stations and devices

Frequently Asked Questions

• What network does the CI869 connect to? It connects to ABB's Advant Fieldbus 100 network using twisted pair.
• Does it support redundancy? Yes, it supports both line redundancy and module redundancy.
• What is the transmission speed? It operates at 1.5 Mbit/s for high-speed fieldbus communication.
• Can it be used in safety systems? Yes, it is compatible with AC 800M High Integrity systems.
• How is it powered? It receives power from the +24V supply through the CEX-Bus.