GE Fanuc IC660BCM501 Battery Charger – Genius I/O

GE Fanuc IC660BCM501 Battery Charger – Genius I/O Handheld Monitor Power Solution

Key Technical Specifications

• Brand: GE Fanuc
• Series: Genius I/O
• Model: IC660BCM501
• Alternate product codes: CIMIC660BCM501, GEFIC660BCM501, 1C660BCM501
• Product type: Battery charger for handheld monitor
• Compatibility: IC660HHM501 handheld monitor only
• Input voltage: 115 V AC or 230 V AC, switch selectable
• Minimum charging time: 15 minutes before first use
• Voltage selection: Manual switch at base of charger
• Operation during charging: Supported, monitor runs while charging
• Weight: 3 lbs

Physical and Interface Features

• LCD display: 4 lines, 16 characters each, clear alphanumeric readout
• Keypad: 20-key sealed membrane, resistant to industrial contaminants
• Keypad layout: Function keys F1-F4, operation keys, decimal keys
• Display languages: English, French, Italian, German selectable
• Keyswitch: Configure (CFG) and Monitor (MON) positions with key removal security

Operational Requirements

• Battery must remain installed: Unit will not operate without battery pack, even on AC power
• Voltage selector switch: Must match incoming AC supply before connecting power
• Initial charge requirement: 15 minutes minimum for new or fully discharged batteries
• Emergency operation: Charge 15 minutes before power-up if battery depleted
• Battery reset procedure: Remove battery pack for 15-20 seconds, then reinstall
• Continuous AC operation: Causes battery deterioration after approximately 2 years
• Degraded battery: May not hold charge for independent use, but AC operation remains functional

Frequently Asked Questions

• What is the IC660BCM501 used for?
  It charges the internal battery pack for the GE Fanuc IC660HHM501 handheld monitor.
• Can I operate the handheld monitor without the battery installed?
  No, the battery must always remain installed even when using AC power.
• What input voltages does the IC660BCM501 support?
  It supports 115 V AC and 230 V AC via manual voltage selector switch.
• How long does the battery need to charge initially?
  A minimum of 15 minutes is required for new or fully discharged batteries.
• Can I use the monitor while it is charging?
  Yes, the handheld monitor operates normally while connected to the IC660BCM501.
• What happens if I run the monitor on AC power continuously?
  After about 2 years, the internal battery may lose capacity for independent operation.
• How do I reset the battery system?
  Remove the battery pack for 15 to 20 seconds, then reinstall it securely.
• What languages does the display support?
  English, French, Italian, and German are available.
• How many keys come with the IC660BCM501?
  Each new unit ships with two identical keys for the keyswitch.
• Is this product new and original?
  Yes, every IC660BCM501 is brand new and factory-sealed GE Fanuc product.

Contact Information
Inquiries: sales@nex-auto.com
WhatsApp: +86 153 9242 9628

Partner: NexAuto Technology Limited