GE Fanuc IC694TBB032 Terminal Block | RX3i PACSystem

มีสินค้าในสต็อก (20 ชิ้น) พร้อมจัดส่งแล้ว

ผู้ขาย:
General Electric
ประเภท:
Terminal Block
Country of Origin:
USA
Dimensions:
22*5*5cm
Weight:
500 g
แท็ก: Terminal block

จำนวน

GE Fanuc IC694TBB032 High-Density Box Style Terminal Block Overview

The IC694TBB032 terminal block accommodates #14 to 26 AWG solid or stranded copper wire, ensuring versatility for various field device connections.
Each of the 36 screw terminals requires a specific tightening torque of 7 lb-in to guarantee a reliable and secure electrical connection.
You must strip wires to a precise length of 0.310 inches (7.87 mm); a reference mark on the bottom of the block assists with accurate preparation.
This component matches the depth of other PACSystem RX3i and Series 90-30 modules, maintaining a consistent and professional panel layout.
While the terminal block supports hot swapping, we recommend removing power from the module when replacing the electronics to prevent any potential damage.

Technical Specifications and Mounting Details

Brand and Manufacturer: This unit is a GE Fanuc part from the PACSystem RX3i series, ensuring genuine compatibility and reliable performance.
Model and Type: The IC694TBB032 functions as a high-density, box-style interface for RX3i I/O modules.
Electrical and Mechanical Data: It features 36 pins with a 7 lb-in tightening torque and supports a 14-26 AWG wire range for solid or stranded conductors.
Environmental Tolerance: The block's high-strength construction provides reliable operation within standard industrial control panel temperatures when installed in a well-ventilated area.
Installation Guide: To install, open the terminal door, push down the latch, and slide the block upwards until it clicks securely into place on the compatible module.

Compatible Modules and Physical Characteristics

Compatible Hardware: Engineers commonly use the IC694TBB032 with PACSystem RX3i High-Density I/O modules and specific Series 90-30 equivalent modules.
Dimensions and Weight: This component has a depth of 0.5 inches and a lightweight design at just 0.35 lbs, making it easy to handle during installation.
Connection Quality: The screw-type terminals provide reliable, vibration-resistant connections, and the thicker outer cover insulation safely accommodates larger gauge wires.
Design Feature: The block utilizes an open architecture at the rear and a protective front door, allowing for organized wiring and easy access for troubleshooting.

Frequently Asked Questions (FAQ)

Q: What is the correct wire size for the IC694TBB032 terminal block?
A: This terminal block accepts wire sizes ranging from #14 AWG to #26 AWG. You can use either solid or stranded copper wire types with this model.
Q: How much torque should I apply to the screws on this terminal block?
A: You must tighten each screw terminal to exactly 7 lb-in. This specific torque value ensures a proper connection without damaging the conductor or the block.
Q: Can I use the IC694TBB032 with old Series 90-30 modules?
A: Yes, this terminal block is compatible with individually isolated, 16-channel Series 90-30 modules, as well as modern RX3i high-density I/O modules.
Q: What is the required wire strip length for termination?
A: You need to strip the insulation from each wire to a length of 0.310 inches (7.87 mm). A guide on the bottom of the IC694TBB032 helps you measure this accurately.
Q: Is this terminal block considered a new original part?
A: Yes, we supply the IC694TBB032 as a brand-new, genuine component, not a refurbished or used unit.