GE Fanuc IC660BCM501 Battery Charger – Genius I/O

มีสินค้าในสต็อก (20 ชิ้น) พร้อมจัดส่งแล้ว

ผู้ขาย:
General Electric
ประเภท:
Battery Charger
Country of Origin:
USA
Dimensions:
22*10*9cm
Weight:
1300 g
แท็ก: Battery charger

จำนวน

GE Fanuc IC660BCM501 Battery Charger – Genius I/O Handheld Monitor Power Solution

Key Technical Specifications

Brand: GE Fanuc
Series: Genius I/O
Model: IC660BCM501
Alternate product codes: CIMIC660BCM501, GEFIC660BCM501, 1C660BCM501
Product type: Battery charger for handheld monitor
Compatibility: IC660HHM501 handheld monitor only
Input voltage: 115 V AC or 230 V AC, switch selectable
Minimum charging time: 15 minutes before first use
Voltage selection: Manual switch at base of charger
Operation during charging: Supported, monitor runs while charging
Weight: 3 lbs

Physical and Interface Features

LCD display: 4 lines, 16 characters each, clear alphanumeric readout
Keypad: 20-key sealed membrane, resistant to industrial contaminants
Keypad layout: Function keys F1-F4, operation keys, decimal keys
Display languages: English, French, Italian, German selectable
Keyswitch: Configure (CFG) and Monitor (MON) positions with key removal security

Operational Requirements

Battery must remain installed: Unit will not operate without battery pack, even on AC power
Voltage selector switch: Must match incoming AC supply before connecting power
Initial charge requirement: 15 minutes minimum for new or fully discharged batteries
Emergency operation: Charge 15 minutes before power-up if battery depleted
Battery reset procedure: Remove battery pack for 15-20 seconds, then reinstall
Continuous AC operation: Causes battery deterioration after approximately 2 years
Degraded battery: May not hold charge for independent use, but AC operation remains functional

Frequently Asked Questions

What is the IC660BCM501 used for?
It charges the internal battery pack for the GE Fanuc IC660HHM501 handheld monitor.
Can I operate the handheld monitor without the battery installed?
No, the battery must always remain installed even when using AC power.
What input voltages does the IC660BCM501 support?
It supports 115 V AC and 230 V AC via manual voltage selector switch.
How long does the battery need to charge initially?
A minimum of 15 minutes is required for new or fully discharged batteries.
Can I use the monitor while it is charging?
Yes, the handheld monitor operates normally while connected to the IC660BCM501.
What happens if I run the monitor on AC power continuously?
After about 2 years, the internal battery may lose capacity for independent operation.
How do I reset the battery system?
Remove the battery pack for 15 to 20 seconds, then reinstall it securely.
What languages does the display support?
English, French, Italian, and German are available.
How many keys come with the IC660BCM501?
Each new unit ships with two identical keys for the keyswitch.
Is this product new and original?
Yes, every IC660BCM501 is brand new and factory-sealed GE Fanuc product.