{"product_id":"pz-g52cn-keyence-thrubeam-photoelectric-sensor","title":"PZ-G52CN Keyence Thrubeam Photoelectric Sensor","description":"\u003ch2\u003e\u003cstrong\u003ePZ-G52CN Keyence Thrubeam Photoelectric Sensor – High-Power 40 m Detection\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e \u003cspan style=\"color: #1a5fb4;\"\u003eKeyence\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003ePZ-G52CN\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e PZ-G series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Built-in amplifier photoelectric sensor, thrubeam, high-power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetecting distance:\u003c\/strong\u003e 40 m maximum (131.2 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight source:\u003c\/strong\u003e Infrared LED × 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity adjustment:\u003c\/strong\u003e 1-turn trimmer (230°)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse time:\u003c\/strong\u003e \u003cspan style=\"color: #c0392b;\"\u003e500 µs maximum\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation mode:\u003c\/strong\u003e LIGHT-ON\/DARK-ON, switch-selectable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 10 to 30 VDC nominal, ripple (P-P) 10% included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e Transmitter 25 mA or less, receiver 28 mA or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput type:\u003c\/strong\u003e NPN open collector, 30 V maximum, 100 mA maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidual voltage:\u003c\/strong\u003e 1 V maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable connection:\u003c\/strong\u003e M8 connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection circuit:\u003c\/strong\u003e Reversed polarity, overcurrent protection, surge absorber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterference suppression:\u003c\/strong\u003e Up to 2 units via polarization filters or automatic different frequency function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -20 to +55 °C, no freezing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative humidity:\u003c\/strong\u003e 35 to 85 % RH, no condensation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IEC IP67, NEMA 4A\/6\/12, DIN IP69K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient light resistance:\u003c\/strong\u003e Incandescent lamp 5,000 lux maximum, sunlight 20,000 lux maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration resistance:\u003c\/strong\u003e 10 to 55 Hz, double amplitude 1.5 mm, 2 hours per axis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock resistance:\u003c\/strong\u003e 1,000 m\/s², 6 times per axis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing material:\u003c\/strong\u003e Glass-fiber reinforced PBT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens cover material:\u003c\/strong\u003e Polyarylate (PAR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 10 g (rectangular connector model)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting torque:\u003c\/strong\u003e 0.5 N·m maximum at the mounting hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eIndicators and Status Feedback\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe transmitter shows a power status through an orange LED.\u003c\/li\u003e\n\u003cli\u003eThe receiver carries an orange output LED for quick signal checks.\u003c\/li\u003e\n\u003cli\u003eA green stable operation LED confirms reliable detection margins.\u003c\/li\u003e\n\u003cli\u003eA red light receiving LED helps technicians align the optical axis.\u003c\/li\u003e\n\u003cli\u003eThese indicators speed up setup and troubleshooting during commissioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the transmitter and receiver facing each other on rigid brackets.\u003c\/li\u003e\n\u003cli\u003eKeep the mounting torque at or below 0.5 N·m to protect the housing.\u003c\/li\u003e\n\u003cli\u003eAlign both units until the red light receiving LED turns on clearly.\u003c\/li\u003e\n\u003cli\u003eSet the operation mode switch to LIGHT-ON or DARK-ON as needed.\u003c\/li\u003e\n\u003cli\u003eTurn the 1-turn trimmer to fine-tune sensitivity for the target.\u003c\/li\u003e\n\u003cli\u003eConfirm the green stable LED stays lit through the full detection cycle.\u003c\/li\u003e\n\u003cli\u003eWire the M8 connector to a 10 to 30 VDC supply with correct polarity.\u003c\/li\u003e\n\u003cli\u003eKeep two units apart or use the different frequency function to avoid crosstalk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental and Interference Performance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003cstrong\u003ePZ-G52CN\u003c\/strong\u003e works from -20 to +55 °C without freezing issues.\u003c\/li\u003e\n\u003cli\u003eHumidity tolerance spans 35 to 85 % RH with no condensation allowed.\u003c\/li\u003e\n\u003cli\u003eSunlight resistance reaches 20,000 lux, so outdoor skylights cause no false trips.\u003c\/li\u003e\n\u003cli\u003eIncandescent lamp resistance reaches 5,000 lux for indoor plant lighting.\u003c\/li\u003e\n\u003cli\u003eVibration testing runs 2 hours per axis at 1.5 mm amplitude.\u003c\/li\u003e\n\u003cli\u003eShock testing applies 1,000 m\/s² six times per axis.\u003c\/li\u003e\n\u003cli\u003ePolarization filters or the automatic different frequency function suppress mutual interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePacking List\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne Keyence \u003cstrong\u003ePZ-G52CN\u003c\/strong\u003e thrubeam sensor set (transmitter and receiver)\u003c\/li\u003e\n\u003cli\u003eOne M8 connector cable as ordered\u003c\/li\u003e\n\u003cli\u003eOne mounting bracket set with screws\u003c\/li\u003e\n\u003cli\u003eOne printed quick reference guide\u003c\/li\u003e\n\u003cli\u003eProtective packaging for safe transit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping and Support\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe ship worldwide through FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003eOrders leave our warehouse within 5 days.\u003c\/li\u003e\n\u003cli\u003eWe accept returns within 30 days of delivery.\u003c\/li\u003e\n\u003cli\u003eAll units are brand new and original from Keyence.\u003c\/li\u003e\n\u003cli\u003eStock is available for immediate order processing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the maximum detection distance of the PZ-G52CN?\u003c\/strong\u003e\u003cbr\u003eA: The thrubeam pair reaches 40 m (131.2 ft) with two infrared LEDs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How fast does the output respond?\u003c\/strong\u003e\u003cbr\u003eA: The response time is 500 µs maximum, which suits high-speed lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Which output type does this model provide?\u003c\/strong\u003e\u003cbr\u003eA: It uses an NPN open collector output rated 30 V and 100 mA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use it in wet or washdown areas?\u003c\/strong\u003e\u003cbr\u003eA: Yes, it carries IP67, NEMA 4A\/6\/12, and DIN IP69K ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What supply voltage does it need?\u003c\/strong\u003e\u003cbr\u003eA: It runs on 10 to 30 VDC nominal with 10% ripple tolerance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How do I adjust sensitivity?\u003c\/strong\u003e\u003cbr\u003eA: Turn the 1-turn trimmer (230°) while watching the green stable LED.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How many units can I install side by side?\u003c\/strong\u003e\u003cbr\u003eA: Up to 2 units with polarization filters or the different frequency function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What connector does the sensor use?\u003c\/strong\u003e\u003cbr\u003eA: It uses an M8 connector for quick cable replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eContact Information Inquiries: \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e or \u003ca href=\"https:\/\/wa.me\/8615392429628\"\u003e+86 153 9242 9628\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePartner NexAuto Technology Limited: \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Keyence","offers":[{"title":"Default Title","offer_id":48573822599329,"sku":"PZ-G52CN","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/PZ-G52CN.jpg?v=1793611136","url":"https:\/\/www.autonexcontrol.com\/products\/pz-g52cn-keyence-thrubeam-photoelectric-sensor","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}