{"product_id":"gl-vm23fp-keyence-gl-v-series-light-curtain","title":"GL-VM23FP Keyence GL-V Series Light Curtain","description":"\u003ch2\u003e\u003cstrong\u003eGL-VM23FP Keyence Safety Light Curtain – Compact Type 4 Finger Protection with PNP Output\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Keyence\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003eGL-VM23FP\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e GL-V series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Type 4 safety light curtain (ESPE \/ AOPD), finger protection type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection capacity:\u003c\/strong\u003e minimum detectable object size ø14 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam axes:\u003c\/strong\u003e 23 axes with 10 mm spacing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection height:\u003c\/strong\u003e 220 mm; total length 240 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetecting distance:\u003c\/strong\u003e 0.3 to 12 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse time:\u003c\/strong\u003e max. 4.8 ms (OSSD, channel 0, ON to OFF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight source:\u003c\/strong\u003e infrared LED at 850 nm, Exempt Group (IEC62471)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective angular aperture:\u003c\/strong\u003e up to ±2.5° at 3 m or above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput type:\u003c\/strong\u003e transistor output x2 (PNP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 24 VDC -20\/+25%, ripple 10% or less, Class 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e transmitter max. 66 mA; receiver max. 76 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum load current:\u003c\/strong\u003e 150 mA or less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidual voltage (ON):\u003c\/strong\u003e up to 2.5 V; OFF voltage up to 2.0 V (5 m cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeakage current:\u003c\/strong\u003e up to 0.8 mA; load capacity 0.8 µF; load wiring resistance up to 2.5 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety standards:\u003c\/strong\u003e IEC61496-1\/-2 Type 4, EN ISO13849-1 Category 4 PL e, IEC61508 SIL3, UL1998\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMC:\u003c\/strong\u003e EN55011 Class A, FCC Part15B Class A, ICES-003 Class A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental Durability and Interference Resistance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature ranges from \u003cstrong\u003e-30 to +55 °C\u003c\/strong\u003e without freezing.\u003c\/li\u003e\n\u003cli\u003eStorage temperature ranges from \u003cstrong\u003e-30 to +70 °C\u003c\/strong\u003e without freezing.\u003c\/li\u003e\n\u003cli\u003eRelative humidity reaches up to \u003cstrong\u003e95 % RH\u003c\/strong\u003e with no condensation.\u003c\/li\u003e\n\u003cli\u003eAmbient light tolerance covers incandescent lamp \u003cstrong\u003e3,000 lux\u003c\/strong\u003e or less.\u003c\/li\u003e\n\u003cli\u003eSunlight tolerance reaches \u003cstrong\u003e20,000 lux\u003c\/strong\u003e or less for bright production halls.\u003c\/li\u003e\n\u003cli\u003eProtection rating meets \u003cstrong\u003eIP65\/IP67\u003c\/strong\u003e under IEC60529 for dusty and wet areas.\u003c\/li\u003e\n\u003cli\u003eVibration resistance handles 5 to 150 Hz at 1G, 10 cycles per axis.\u003c\/li\u003e\n\u003cli\u003eShock resistance handles 15 G pulses of 6 ms, 100 times per axis.\u003c\/li\u003e\n\u003cli\u003eInterference prevention supports up to 2 units through series connection and switch setting.\u003c\/li\u003e\n\u003cli\u003eProtection circuits cover supply reverse-connection, per-output short-circuit and surge events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePhysical Build and Materials\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe main unit uses aluminum alloy for stiff mounting on machine frames.\u003c\/li\u003e\n\u003cli\u003eUpper and lower cases use PPS with GF40% for heat and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eThe front cover combines polycarbonate and SUS304 for impact strength.\u003c\/li\u003e\n\u003cli\u003eTransmitter weight is \u003cstrong\u003e170 g\u003c\/strong\u003e and receiver weight is \u003cstrong\u003e170 g\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eOptical synchronization removes the need for dedicated sync wiring between units.\u003c\/li\u003e\n\u003cli\u003eThe detection mode turns ON only when all beam axes receive light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the transmitter and receiver facing each other within the 0.3 to 12 m range.\u003c\/li\u003e\n\u003cli\u003eAlign both units so the effective angular aperture stays within ±2.5° at 3 m or above.\u003c\/li\u003e\n\u003cli\u003eKeep the 10 mm beam axis spacing clear of fixtures, cables and moving parts.\u003c\/li\u003e\n\u003cli\u003eWire the 24 VDC supply with Class 2 isolation and keep ripple below 10% P-P.\u003c\/li\u003e\n\u003cli\u003eConnect the two PNP OSSD outputs to the safety relay or controller input.\u003c\/li\u003e\n\u003cli\u003eSet the series connection switch when you install two units side by side.\u003c\/li\u003e\n\u003cli\u003eVerify response time of max. 4.8 ms against your machine stopping distance.\u003c\/li\u003e\n\u003cli\u003eConfirm IP65\/IP67 seals stay intact after routing cables through the gland.\u003c\/li\u003e\n\u003cli\u003eTest the detection height of 220 mm with a ø14 mm test rod before production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePacking List\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeyence \u003cstrong\u003eGL-VM23FP\u003c\/strong\u003e transmitter unit x1\u003c\/li\u003e\n\u003cli\u003eKeyence \u003cstrong\u003eGL-VM23FP\u003c\/strong\u003e receiver unit x1\u003c\/li\u003e\n\u003cli\u003eMounting brackets and fixing screws\u003c\/li\u003e\n\u003cli\u003eInstruction sheet for the GL-V series\u003c\/li\u003e\n\u003cli\u003eProtective packaging for safe transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe ship worldwide through FedEx, UPS and DHL.\u003c\/li\u003e\n\u003cli\u003eWe dispatch stock items within 5 days after order confirmation.\u003c\/li\u003e\n\u003cli\u003eWe provide tracking numbers once the carrier collects the parcel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the minimum detectable object size of the GL-VM23FP?\u003c\/strong\u003e\u003cbr\u003eA: The GL-VM23FP detects objects as small as ø14 mm, which suits finger protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How many beam axes does this light curtain have?\u003c\/strong\u003e\u003cbr\u003eA: It offers 23 beam axes with 10 mm spacing and a 220 mm detection height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What detecting distance does the GL-VM23FP support?\u003c\/strong\u003e\u003cbr\u003eA: The unit works from 0.3 to 12 m between transmitter and receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the response time of the OSSD output?\u003c\/strong\u003e\u003cbr\u003eA: The OSSD response time reaches max. 4.8 ms on channel 0 from ON to OFF.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Which output type does the GL-VM23FP provide?\u003c\/strong\u003e\u003cbr\u003eA: It provides two PNP transistor outputs for safety signal switching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How much current does the unit draw?\u003c\/strong\u003e\u003cbr\u003eA: The transmitter draws max. 66 mA and the receiver draws max. 76 mA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What protection rating does the housing offer?\u003c\/strong\u003e\u003cbr\u003eA: The housing meets IP65\/IP67, so it resists dust and water ingress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the operating temperature range?\u003c\/strong\u003e\u003cbr\u003eA: The unit operates from -30 to +55 °C without freezing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is the product new and original?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we supply brand new original units, and we keep stock ready.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How fast do you ship, and which carriers do you use?\u003c\/strong\u003e\u003cbr\u003eA: We ship within 5 days via DHL, FedEx and UPS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you accept returns?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we support returns within 30 days of delivery.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Keyence","offers":[{"title":"Default Title","offer_id":49136363077793,"sku":"GL-VM23FP","price":253.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/GL-VM23FP-1.jpg?v=1795080826","url":"https:\/\/www.autonexcontrol.com\/products\/gl-vm23fp-keyence-gl-v-series-light-curtain","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}