{"product_id":"dt500-a411-sick-dx500-laser-distance-sensor","title":"DT500-A411 SICK Dx500 Laser Distance Sensor","description":"\u003ch2\u003e\u003cstrong\u003eDT500-A411 SICK Dx500 Short Range Laser Distance Sensor\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e \u003cstrong\u003eSICK\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003eDT500-A411\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e \u003cstrong\u003eDx500\u003c\/strong\u003e Short Range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 1040465\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Principle:\u003c\/strong\u003e Pulsed optical laser time-of-flight distance measurement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasuring Range:\u003c\/strong\u003e 0.2 m to 7 m on 90% white remission; 0.8 m to 7 m on 6% black remission\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Source:\u003c\/strong\u003e Visible red laser diode at 650 nm wavelength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Class:\u003c\/strong\u003e Class 2 per IEC 60825-1:2014 and EN 60825-1:2014; average optical power below 1 mW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse Time:\u003c\/strong\u003e 150 ms in fast short-range mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatability:\u003c\/strong\u003e 3 mm to 5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Accuracy:\u003c\/strong\u003e Typically ±3 mm to ±10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog Output:\u003c\/strong\u003e 1x current output 4 mA to 20 mA with load up to 500 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFieldbus Interface:\u003c\/strong\u003e CAN Layer 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Input:\u003c\/strong\u003e 1x PNP multifunctional input (MF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e DC 10 V to 30 V with reverse-polarity protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e ≤3.5 W to 4 W without load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Connection:\u003c\/strong\u003e M12 male connector, 5-pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature, Operation:\u003c\/strong\u003e -10 °C to +45 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature, Storage:\u003c\/strong\u003e -25 °C to +75 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Protection Rating:\u003c\/strong\u003e IP65 per EN 60529\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 69 mm x 50 mm x 153 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Heavy-duty aluminum die-cast housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevice Weight:\u003c\/strong\u003e Approx. 1,000 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCore Performance Highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDT500-A411\u003c\/strong\u003e delivers short-range high-precision reflectorless measurement up to 7 m.\u003c\/li\u003e\n\u003cli\u003eHigh optical output power ensures reliable readings on dark and uncooperative surfaces without a reflector.\u003c\/li\u003e\n\u003cli\u003eThe robust cast aluminum housing withstands severe industrial vibration and impact.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #c0392b;\"\u003e\u003cstrong\u003eThe 150 ms response time supports fast short-range measurement cycles.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #c0392b;\"\u003e\u003cstrong\u003eRepeatability of 3 mm to 5 mm supports stable and consistent distance readings.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eThe Class 2 laser remains safe for typical industrial operation under IEC 60825-1:2014.\u003c\/li\u003e\n\u003cli\u003eIP65 protection resists dust ingress and water jets in demanding plant environments.\u003c\/li\u003e\n\u003cli\u003eThe front panel display and keypad enable direct on-site setup without extra tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the \u003cstrong\u003eDT500-A411\u003c\/strong\u003e on a rigid bracket to avoid vibration-induced measurement drift.\u003c\/li\u003e\n\u003cli\u003eKeep the laser beam perpendicular to the target surface for the best accuracy.\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum distance of 0.2 m to white targets and 0.8 m to black targets.\u003c\/li\u003e\n\u003cli\u003eConnect the 5-pin M12 connector to a DC 10 V to 30 V supply with correct polarity.\u003c\/li\u003e\n\u003cli\u003eWire the 4 mA to 20 mA current output to a load of 500 Ω or less.\u003c\/li\u003e\n\u003cli\u003eUse the CAN Layer 2 interface for fieldbus integration with the control system.\u003c\/li\u003e\n\u003cli\u003eConfigure measurement mode and output scaling through the front panel keypad.\u003c\/li\u003e\n\u003cli\u003eKeep ambient temperature within -10 °C to +45 °C during operation.\u003c\/li\u003e\n\u003cli\u003eAlign the sensor housing so the front window stays free from dust and debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage List\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x \u003cstrong\u003eSICK\u003c\/strong\u003e \u003cstrong\u003eDT500-A411\u003c\/strong\u003e distance sensor\u003c\/li\u003e\n\u003cli\u003e1x M12 5-pin connector or connection cable (depending on order configuration)\u003c\/li\u003e\n\u003cli\u003e1x mounting accessory set (depending on order configuration)\u003c\/li\u003e\n\u003cli\u003e1x printed quick start guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping and Support\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe ship all orders within 5 days after payment confirmation.\u003c\/li\u003e\n\u003cli\u003eWe use common express carriers such as FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003eWe support returns within 30 days of delivery.\u003c\/li\u003e\n\u003cli\u003eAll units are brand new and original from the manufacturer.\u003c\/li\u003e\n\u003cli\u003eWe keep stock available for fast order fulfillment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the measuring range of the DT500-A411?\u003c\/strong\u003e\u003cbr\u003eA: It measures 0.2 m to 7 m on 90% white remission and 0.8 m to 7 m on 6% black remission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the response time of this sensor?\u003c\/strong\u003e\u003cbr\u003eA: The response time is 150 ms in fast short-range mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What output interfaces does the DT500-A411 provide?\u003c\/strong\u003e\u003cbr\u003eA: It offers a 4 mA to 20 mA current output, a CAN Layer 2 fieldbus interface, and one PNP multifunctional input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the measurement accuracy and repeatability?\u003c\/strong\u003e\u003cbr\u003eA: Accuracy is typically ±3 mm to ±10 mm, and repeatability is 3 mm to 5 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What supply voltage does the sensor require?\u003c\/strong\u003e\u003cbr\u003eA: It operates on DC 10 V to 30 V with reverse-polarity protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the operating temperature range?\u003c\/strong\u003e\u003cbr\u003eA: The operating range is -10 °C to +45 °C, and storage range is -25 °C to +75 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the enclosure protection rating?\u003c\/strong\u003e\u003cbr\u003eA: The housing meets IP65 per EN 60529 for dust and water jet protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What laser class does the DT500-A411 use?\u003c\/strong\u003e\u003cbr\u003eA: It uses a Class 2 visible red laser at 650 nm with average optical power below 1 mW.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What are the housing dimensions and weight?\u003c\/strong\u003e\u003cbr\u003eA: The housing measures 69 mm x 50 mm x 153 mm and weighs approximately 1,000 g.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is the DT500-A411 brand new and in stock?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all units are brand new and original, and we keep stock available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How fast do you ship and which carriers do you use?\u003c\/strong\u003e\u003cbr\u003eA: We ship within 5 days using FedEx, UPS, and DHL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you accept returns?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we support returns within 30 days.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SICK","offers":[{"title":"Default Title","offer_id":48935311114401,"sku":"DT500-A411","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/DT500-A411-1.jpg?v=1794211929","url":"https:\/\/www.autonexcontrol.com\/products\/dt500-a411-sick-dx500-laser-distance-sensor","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}