{"product_id":"330905-05-08-10-01-00-bently-nevada-3300-nsv-proximity-probe","title":"330905-05-08-10-01-00 | Bently Nevada 3300 NSv Proximity Probe","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 330905-05-08-10-01-00: 3300 NSv Proximity Probe Overview\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer \u0026amp; Series:\u003c\/strong\u003e \u003cstrong\u003eBently Nevada\u003c\/strong\u003e, \u003cstrong\u003e3300 NSv Proximity Probes\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e330905-05-08-10-01-00\u003c\/strong\u003e – M10x1 thread, no armor, 50mm unthreaded length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase \u0026amp; Total Length:\u003c\/strong\u003e 80mm overall case length; total length 1.0 meter (39 inches).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Miniature coaxial ClickLoc connector with protector, standard cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e Option -00 (Not required).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eLinear Range and Electrical Performance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 1.5 mm (60 mils) from 0.25 mm to 1.75 mm (10 to 70 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage range:\u003c\/strong\u003e Approximately -1 to -13 Vdc over the linear range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap Setting:\u003c\/strong\u003e 1.0 mm (40 mils) from the target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil), tolerance +12.5%\/-20% including interchangeability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL):\u003c\/strong\u003e Less than ±0.06 mm (±2.3 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 4.2 ± 0.5 ohms for 1.0 meter length from center to outer conductor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequency Response and Target Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0 to 10 kHz typical, +0, -3 dB with up to 305 meters field wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum flat target diameter:\u003c\/strong\u003e 8.9 mm (0.35 in); recommended minimum 13 mm (0.5 in).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall shaft note:\u003c\/strong\u003e Scale factor may change for shafts under 13 mm; reduce gap to limit change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring:\u003c\/strong\u003e Use 0.2 to 1.5 mm² (16-24 AWG) or 0.25-0.75 mm² with ferrules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended cable:\u003c\/strong\u003e Three-conductor shielded triad, max length 305 meters to Proximitor Sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental \u0026amp; Mechanical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 ohm coaxial, FEP insulated, available in 0.5, 1, 5, or 7 meters total probe length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 inch) with or without stainless steel armor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Torque on M10x1 threads:\u003c\/strong\u003e 0.56 N•m (5 in•lb) finger-tight; case threads first three threads max 22.6 N•m (200 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Seal Design:\u003c\/strong\u003e Viton O-ring seals differential pressure; probes not pressure tested before shipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eExtension Cable Electrical Data and Installation\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable DC Resistance:\u003c\/strong\u003e Center conductor 0.220 Ω\/m (0.067 Ω\/ft); shield 0.066 Ω\/m (0.020 Ω\/ft).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Capacitance:\u003c\/strong\u003e 69.9 pF\/m (21.3 pF\/ft) typical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Torque for Probe Installation:\u003c\/strong\u003e Finger tight, never exceed 0.56 N•m (5 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Thread Engagement Length:\u003c\/strong\u003e M10x1 case thread allows up to 15 mm engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fully interchangeable with previous 3300 RAM probes and extension cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Chemical Resistance:\u003c\/strong\u003e Superior to 3300 RAM, suitable for harsh compressor environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is this probe brand new and original?\u003c\/strong\u003e\u003cbr\u003eA: Yes. We supply only new original \u003cstrong\u003e3300 NSv Proximity Probes\u003c\/strong\u003e in factory packaging with full traceability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you have the 330905-05-08-10-01-00 in stock?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we keep this model in stock for immediate dispatch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How long does delivery take?\u003c\/strong\u003e\u003cbr\u003eA: We ship within 5 days via FedEx, UPS, or DHL. Transit time depends on your location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the linear range of the 3300 NSv probe?\u003c\/strong\u003e\u003cbr\u003eA: The probe provides a 1.5 mm (60 mils) linear range from 0.25 mm to 1.75 mm from target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe with older Bently Nevada systems?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The \u003cstrong\u003e3300 NSv\u003c\/strong\u003e is mechanically and electrically compatible with 3300 RAM proximity systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the recommended gap setting?\u003c\/strong\u003e\u003cbr\u003eA: Bently Nevada recommends a 1.0 mm (40 mils) gap for optimal performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does the probe support high temperature?\u003c\/strong\u003e\u003cbr\u003eA: Yes. Operating range spans -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What field wiring length works best?\u003c\/strong\u003e\u003cbr\u003eA: You can use up to 305 meters (1000 feet) of shielded triad cable without significant signal rolloff.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I return the probe if it doesn't fit?\u003c\/strong\u003e\u003cbr\u003eA: Yes. We support 30-day returns for items in original, uninstalled condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is the probe pressure tested before shipping?\u003c\/strong\u003e\u003cbr\u003eA: Standard probes do not receive pressure testing. Contact our custom department if you need this service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContact Information Inquiries:\u003c\/strong\u003e Email us at \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e or call \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/wa.me\/8615392429628\" target=\"_blank\"\u003e+86 153 9242 9628\u003c\/a\u003e (WhatsApp). We are ready to support your \u003cstrong\u003e3300 NSv Proximity Probes\u003c\/strong\u003e order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePartner NexAuto Technology Limited :\u003c\/strong\u003e \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.nex-auto.com\/\" target=\"_blank\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46469971837089,"sku":"330905-05-08-10-01-00","price":227.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/330905-05-08-10-01-00.jpg?v=1779955580","url":"https:\/\/www.autonexcontrol.com\/products\/330905-05-08-10-01-00-bently-nevada-3300-nsv-proximity-probe","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}