{"product_id":"330903-00-05-10-01-05-3300-nsv-probe-bently-nevada","title":"330903-00-05-10-01-05 3300 NSv Probe | Bently Nevada","description":"\u003ch2\u003e\u003cstrong\u003e330903-00-05-10-01-05 3300 NSv Proximity Probes – Precision Measurement for Critical Machinery\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Technical Specifications at a Glance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model:\u003c\/strong\u003e Bently Nevada \u003cstrong\u003e330903-00-05-10-01-05\u003c\/strong\u003e (3300 NSv Probe).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread \u0026amp; Armor:\u003c\/strong\u003e M8X1 thread, without armor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Configurations:\u003c\/strong\u003e Unthreaded length 00 mm, overall case length 05-50 mm, total length 1.0 meter (39 inches).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Miniature coaxial ClickLoc connector with connector protector and standard cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e Option 05 – Multiple Approvals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 4.2 ± 0.5 ohms from center conductor to outer conductor (1.0m length).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 1.5 mm (60 mils) starting from 0.25 mm (10 mils) off target; range spans 0.25 to 1.75 mm (10 to 70 mils) yielding approximately -1 to -13 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap Setting:\u003c\/strong\u003e 1.0 mm (40 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) with +12.5%\/-20% interchangeability error over 0.25 mm steps across the linear range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL):\u003c\/strong\u003e Less than ±0.06 mm (±2.3 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0 to 10 kHz at +0, -3 dB typical with up to 305 meters (1000 feet) of field wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Size (Flat Target):\u003c\/strong\u003e Minimum 8.9 mm (0.35 in) diameter; recommended minimum 13 mm (0.5 in) diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω coaxial with fluoroethylene propylene (FEP) insulation; total probe lengths available: 0.5, 1, 5, or 7 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Torque:\u003c\/strong\u003e Finger tight; maximum 0.56 N•m (5 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in) with or without SST armor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temperature:\u003c\/strong\u003e Same range -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Capability:\u003c\/strong\u003e Uses a Viton O-ring to seal differential pressure between probe tip and case. Probes do not ship pressure tested.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector-to-Connector Torque for M8X1 Case:\u003c\/strong\u003e Maximum rated 7.3 N•m (65 in•lb); recommended 5.1 N•m (45 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Thread Engagement Length:\u003c\/strong\u003e 12 mm for M8x1 probe case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eExtension Cable \u0026amp; Field Wiring Details\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable DC Resistance:\u003c\/strong\u003e Center conductor 0.220 Ω\/m (0.067 Ω\/ft); shield 0.066 Ω\/m (0.020 Ω\/ft).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Capacitance:\u003c\/strong\u003e 69.9 pF\/m (21.3 pF\/ft) typical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring:\u003c\/strong\u003e Use 0.2 to 1.5 mm² (16 to 24 AWG) or 0.25 to 0.75 mm² with ferrules. We recommend a three-conductor shielded triad cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Field Wiring Length:\u003c\/strong\u003e 305 meters (1000 feet) between the 3300 XL NSv Proximitor Sensor and the monitor. Refer to frequency response graphs for signal rolloff at high frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is this 3300 NSv probe fully compatible with older 3300 RAM systems?\u003c\/strong\u003e\u003cbr\u003eA: Yes, the \u003cstrong\u003e330903-00-05-10-01-05\u003c\/strong\u003e is mechanically and electrically interchangeable with previous 3300 RAM probes and extension cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the recommended gap voltage at the 1.0 mm setting?\u003c\/strong\u003e\u003cbr\u003eA: At 1.0 mm (40 mils) gap, the output voltage typically falls between -1 and -13 Vdc, with linear behavior across the 1.5 mm range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I use this probe for high-pressure compressor applications?\u003c\/strong\u003e\u003cbr\u003eA: Yes, the NSv model offers increased chemical resistance and a Viton O-ring seal. However, we do not pressure test probes before shipping. Contact our custom design department if you require a pressure seal test.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What happens if the target diameter is smaller than 13 mm?\u003c\/strong\u003e\u003cbr\u003eA: A smaller shaft diameter may alter the scale factor. You can reduce the gap between the probe and target to minimize this effect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How long is the total probe cable and what type?\u003c\/strong\u003e\u003cbr\u003eA: This version comes with a 1.0 meter (39 inch) 75 Ω coaxial FEP insulated cable with a ClickLoc connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you have stock and how fast do you ship?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we have the \u003cstrong\u003e330903-00-05-10-01-05\u003c\/strong\u003e in stock. We ship within 5 days using FedEx, UPS, or DHL.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top: 20px;\"\u003eFor inquiries or orders, please contact us at \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e or \u003ca href=\"https:\/\/wa.me\/8615392429628\"\u003e+86 153 9242 9628\u003c\/a\u003e (WhatsApp). Partner: \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003eNexAuto Technology Limited\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46524272935073,"sku":"330903-00-05-10-01-05","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/330903-00-05-10-01-05.jpg?v=1780990234","url":"https:\/\/www.autonexcontrol.com\/products\/330903-00-05-10-01-05-3300-nsv-probe-bently-nevada","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}