{"product_id":"330903-00-03-10-11-00-bently-nevada-nsv-proximity-probe-1-0m","title":"330903-00-03-10-11-00 Bently Nevada NSv Proximity Probe 1.0m","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 330903-00-03-10-11-00 NSv Proximity Probe – Technical Overview\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bently Nevada – a trusted name in machinery protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel number:\u003c\/strong\u003e \u003cstrong\u003e330903-00-03-10-11-00\u003c\/strong\u003e (3300 NSv Proximity Probe).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New \u0026amp; original in factory packing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded length option:\u003c\/strong\u003e 00 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall case length option:\u003c\/strong\u003e 30 mm (-03).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type:\u003c\/strong\u003e Miniature coaxial ClickLoc with protector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency approval:\u003c\/strong\u003e 00 = not required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Technical Specifications – Electrical \u0026amp; Performance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC resistance (RPROBE):\u003c\/strong\u003e 4.2 ± 0.5 ohms for 1.0m length (center to outer conductor).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension cable DC resistance:\u003c\/strong\u003e center conductor 0.220 Ω\/m, shield 0.066 Ω\/m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension cable capacitance:\u003c\/strong\u003e 69.9 pF\/m (21.3 pF\/ft) typical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField wiring:\u003c\/strong\u003e 0.2 to 1.5 mm² (16-24 AWG); use three-conductor shielded triad cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax field wiring length:\u003c\/strong\u003e 305 meters (1000 feet) between Proximitor Sensor and monitor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear range:\u003c\/strong\u003e 1.5 mm (60 mils) starting at 0.25 mm (10 mils) from target; output -1 to -13 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended gap setting:\u003c\/strong\u003e 1.0 mm (40 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) +12.5%\/-20% including interchangeability error.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from best fit straight line (DSL):\u003c\/strong\u003e less than ±0.06 mm (±2.3 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 0 to 10 kHz: +0, -3 dB typical with up to 305m field wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget size (flat target):\u003c\/strong\u003e minimum 8.9 mm diameter; recommended minimum 13 mm diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eMechanical \u0026amp; Environmental Tolerances\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe tip material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe case material:\u003c\/strong\u003e AISI 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe cable type:\u003c\/strong\u003e 75 Ω coaxial, FEP insulated; total lengths 0.5, 1, 5, or 7 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended torque:\u003c\/strong\u003e Finger tight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum torque:\u003c\/strong\u003e 0.56 N•m (5 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum bend radius:\u003c\/strong\u003e 25.4 mm (1.0 inch) with or without SST armor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe pressure design:\u003c\/strong\u003e Seals differential pressure via Viton O-ring (not pressure tested before shipment).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector-to-connector torque (M8x1 case):\u003c\/strong\u003e max rated 7.3 N•m (65 in•lb), recommended 5.1 N•m (45 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum thread engagement length (M8x1):\u003c\/strong\u003e 12 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation \u0026amp; Mounting Guidelines\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque application:\u003c\/strong\u003e Use finger tight for initial installation; never exceed 0.56 N•m on the probe body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread engagement:\u003c\/strong\u003e Ensure at least 12 mm of M8x1 thread engagement for secure mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBending cable:\u003c\/strong\u003e Maintain a minimum bend radius of 25.4 mm to avoid damaging the coaxial cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap setting procedure:\u003c\/strong\u003e Set the probe gap to 1.0 mm (40 mils) from the target for optimal linear operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField wiring recommendations:\u003c\/strong\u003e Use a three-conductor shielded triad cable (16–24 AWG). Keep total field wiring within 305 meters to preserve frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget considerations:\u003c\/strong\u003e For shaft diameters under 13 mm, reduce the gap to minimize scale factor changes. Refer to Figure 12 in the full manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is the \u003cstrong\u003e330903-00-03-10-11-00\u003c\/strong\u003e brand new and original?\u003c\/strong\u003e\u003cbr\u003eA: Yes, every probe we offer is 100% new, original Bently Nevada stock in factory packing. No refurbished or counterfeit units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you have this 3300 NSv probe in stock?\u003c\/strong\u003e\u003cbr\u003eA: We maintain real inventory. The \u003cstrong\u003e330903-00-03-10-11-00\u003c\/strong\u003e is currently in stock and available for immediate order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the linear range and recommended gap for this probe?\u003c\/strong\u003e\u003cbr\u003eA: The linear range spans 1.5 mm (from 0.25 mm to 1.75 mm). Bently Nevada recommends a 1.0 mm gap setting for standard applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What maximum temperature can this NSv probe withstand?\u003c\/strong\u003e\u003cbr\u003eA: The probe operates reliably from -52°C up to +177°C (-62°F to +351°F), both in operation and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How long does shipping take and which carriers do you use?\u003c\/strong\u003e\u003cbr\u003eA: We dispatch within 5 business days. Ship via FedEx, UPS, or DHL. Transit times depend on your location (typically 2-6 days).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Can I return the product if it doesn’t fit my application?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we offer a 30-day return policy from the delivery date. The probe must remain in original, unopened factory packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the scale factor of the \u003cstrong\u003e330903-00-03-10-11-00\u003c\/strong\u003e?\u003c\/strong\u003e\u003cbr\u003eA: The incremental scale factor equals 7.87 V\/mm (200 mV\/mil) with +12.5%\/-20% interchangeability tolerance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does the probe seal high pressure?\u003c\/strong\u003e\u003cbr\u003eA: The Viton O-ring seals differential pressure between tip and case. However, Bently Nevada does not pre-pressure-test each unit. Contact custom design for specific pressure tests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eContact \u0026amp; Support\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eFor technical inquiries or purchase assistance regarding \u003cstrong\u003e330903-00-03-10-11-00\u003c\/strong\u003e or other 3300 NSv series probes, please reach out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmail: \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhatsApp \/ Phone: \u003ca href=\"https:\/\/wa.me\/8615392429628\"\u003e+86 153 9242 9628\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePartner: \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003eNexAuto Technology Limited\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46470150422689,"sku":"330903-00-03-10-11-00","price":246.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/330903-00-03-10-11-00.jpg?v=1779959360","url":"https:\/\/www.autonexcontrol.com\/products\/330903-00-03-10-11-00-bently-nevada-nsv-proximity-probe-1-0m","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}