{"product_id":"330709-000-040-50-01-05-bently-nevada-3300-xl-11-mm-probe","title":"330709-000-040-50-01-05 Bently Nevada 3300 XL 11 mm Probe","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 330709-000-040-50-01-05 | 3300 XL 11 mm Proximity Probe\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Technical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003e330709-000-040-50-01-05\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e 3300 XL 11 mm Proximity Probes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Thread:\u003c\/strong\u003e M16 x 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArmor:\u003c\/strong\u003e Without armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 5.0 meters (16.4 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e \u003cspan style=\"color: #c0392b;\"\u003e7.2 ± 0.8 ohms\u003c\/span\u003e from center conductor to outer conductor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Miniature coaxial ClickLoc connector with protector, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e Multiple Approvals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω triaxial, FEP insulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e \u003cspan style=\"color: #c0392b;\"\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Torque:\u003c\/strong\u003e Recommended 21.1 N•m (187 in•lb); Maximum rated 63.3 N•m (560 in•lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector-to-Connector Torque:\u003c\/strong\u003e Finger tight recommended; maximum 0.565 N•m (5 in•lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Thread Engagement:\u003c\/strong\u003e 24 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eMeasurement and Cross-talk Limits\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Size (Flat Surface Diameter):\u003c\/strong\u003e Recommended minimum 30.5 mm (1.2 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e Recommended minimum 152 mm (6.0 in)\u003c\/li\u003e\n\u003cli\u003eThese limits help reduce cross-talk between adjacent probes.\u003c\/li\u003e\n\u003cli\u003eThey support accurate displacement and vibration measurement.\u003c\/li\u003e\n\u003cli\u003eProper target size improves signal linearity and stability.\u003c\/li\u003e\n\u003cli\u003eFollow these values for reliable machine protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eTemperature Classification for Hazardous Areas\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFor EPL Ga and Gc:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eT1: Ambient Temperature -55°C to +232°C\u003c\/li\u003e\n\u003cli\u003eT2: Ambient Temperature -55°C to +177°C\u003c\/li\u003e\n\u003cli\u003eT3: Ambient Temperature -55°C to +120°C\u003c\/li\u003e\n\u003cli\u003eT4: Ambient Temperature -55°C to +80°C\u003c\/li\u003e\n\u003cli\u003eT5: Ambient Temperature -55°C to +40°C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFor EPL Dc:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eT280°C @ Ta: Ambient Temperature -55°C to +232°C\u003c\/li\u003e\n\u003cli\u003eT225°C @ Ta: Ambient Temperature -55°C to +177°C\u003c\/li\u003e\n\u003cli\u003eT170°C @ Ta: Ambient Temperature -55°C to +120°C\u003c\/li\u003e\n\u003cli\u003eT130°C @ Ta: Ambient Temperature -55°C to +80°C\u003c\/li\u003e\n\u003cli\u003eT105°C @ Ta: Ambient Temperature -55°C to +100°C\u003c\/li\u003e\n\u003cli\u003eT90°C @ Ta: Ambient Temperature -55°C to +40°C\u003c\/li\u003e\n\u003cli\u003eExposing the probe below -34°C (-30°F) may cause premature pressure seal failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the probe with an M16 x 1.5 threaded hole.\u003c\/li\u003e\n\u003cli\u003eKeep thread engagement within 24 mm maximum.\u003c\/li\u003e\n\u003cli\u003eTighten the probe case to 21.1 N•m (187 in•lb) recommended torque.\u003c\/li\u003e\n\u003cli\u003eDo not exceed 63.3 N•m (560 in•lb) maximum rated torque.\u003c\/li\u003e\n\u003cli\u003eHand-tighten the connector, then apply up to 0.565 N•m (5 in•lb) maximum.\u003c\/li\u003e\n\u003cli\u003eRespect a minimum bend radius of 25.4 mm (1.0 in).\u003c\/li\u003e\n\u003cli\u003eUse only a five-meter Proximitor Sensor with this five-meter probe.\u003c\/li\u003e\n\u003cli\u003eVerify target size and shaft diameter before final positioning.\u003c\/li\u003e\n\u003cli\u003eCheck probe DC resistance after installation for proper connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage List\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne Bently Nevada \u003cstrong\u003e330709-000-040-50-01-05\u003c\/strong\u003e proximity probe\u003c\/li\u003e\n\u003cli\u003eOne miniature coaxial ClickLoc connector with protector\u003c\/li\u003e\n\u003cli\u003eStandard probe cable, 5.0 meters total length\u003c\/li\u003e\n\u003cli\u003eProtective packaging for safe transport\u003c\/li\u003e\n\u003cli\u003eShipping by FedEx, UPS, or DHL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the probe DC resistance?\u003c\/strong\u003e\u003cbr\u003eA: It is 7.2 ± 0.8 ohms from the center conductor to the outer conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the operating temperature range?\u003c\/strong\u003e\u003cbr\u003eA: The probe operates from -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Which Proximitor Sensor should I use?\u003c\/strong\u003e\u003cbr\u003eA: Use only a five-meter Proximitor Sensor with this five-meter probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the recommended minimum target size?\u003c\/strong\u003e\u003cbr\u003eA: The recommended minimum flat surface diameter is 30.5 mm (1.2 in).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the recommended shaft diameter?\u003c\/strong\u003e\u003cbr\u003eA: The recommended minimum shaft diameter is 152 mm (6.0 in).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What torque should I apply to the probe case?\u003c\/strong\u003e\u003cbr\u003eA: Use 21.1 N•m (187 in•lb) recommended torque, with a maximum of 63.3 N•m (560 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is the minimum bend radius?\u003c\/strong\u003e\u003cbr\u003eA: The minimum bend radius is 25.4 mm (1.0 in) with or without SST armor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is the probe new and original?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we supply brand new original products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do you have stock?\u003c\/strong\u003e\u003cbr\u003eA: Yes, we have stock available for immediate order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How fast do you ship?\u003c\/strong\u003e\u003cbr\u003eA: We ship within 5 days after order confirmation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What shipping methods do you use?\u003c\/strong\u003e\u003cbr\u003eA: We use common carriers such as DHL, FedEx, and UPS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is your return policy?\u003c\/strong\u003e\u003cbr\u003eA: We support returns within 30 days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eContact Information Inquiries: \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e, \u003ca href=\"https:\/\/wa.me\/8615392429628\"\u003e+86 153 9242 9628\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ePartner NexAuto Technology Limited: \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":47439969255585,"sku":"330709-000-040-50-01-05","price":258.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/330709-000-040-50-01-05-1.jpg?v=1789546286","url":"https:\/\/www.autonexcontrol.com\/products\/330709-000-040-50-01-05-bently-nevada-3300-xl-11-mm-probe","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}