{"product_id":"330104-15-25-10-02-05-bently-nevada-3300-xl-proximity-probe","title":"330104-15-25-10-02-05 Bently Nevada 3300 XL Proximity Probe","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 330104-15-25-10-02-05 3300 XL 8 mm Proximity Probe\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Technical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer \u0026amp; Model:\u003c\/strong\u003e Bently Nevada – \u003cstrong\u003e330104-15-25-10-02-05\u003c\/strong\u003e, 3300 XL 8 mm Proximity Probe, Metric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 150 mm (Option 15) – extended reach for deeper installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e 250 mm (Option 25).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 1.0 meter (3.3 feet) with miniature coaxial ClickLoc connector and standard cable (Option 02).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e CSA, ATEX, IECEx (Option 05) for hazardous areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS) for chemical resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 303 or 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Thread:\u003c\/strong\u003e M10 x 1 with max engagement of 15 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal DC Resistance (RPROBE):\u003c\/strong\u003e 7.59 ± 0.50 Ω for 1.0 m length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 2 mm (80 mils) from 0.25 to 2.3 mm (10 to 90 mils), approximately –1 to –17 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Radial Vibration Gap:\u003c\/strong\u003e -9 Vdc (approx. 1.27 mm \/ 50 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring:\u003c\/strong\u003e 0.2 to 1.5 mm² (16 to 24 AWG), 3-conductor shielded triad, max 305 m (1000 ft) to monitor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range (Standard):\u003c\/strong\u003e -52 °C to +177 °C (-62 °F to +350 °F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative Humidity:\u003c\/strong\u003e Less than 3% ASF change after 56 days at 93% RH (IEC 68-2-3).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntrinsic Safety:\u003c\/strong\u003e AEx\/Ex ia IIC T5…T1 Ga (with zener barriers or galvanic isolators).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-incendive:\u003c\/strong\u003e AEx\/Ex nA IIC T5…T1 Gc, Class I, Division 2, Groups A-D.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation \u0026amp; Mechanical Details\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse the M10 x 1 thread for mounting; ensure thread engagement does not exceed 15 mm.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #cc0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The 150 mm unthreaded length (Option 15) provides extra reach for applications requiring deeper probe placement.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eConnect field wiring with 3-conductor shielded triad cable (16–24 AWG) for signal integrity.\u003c\/li\u003e\n\u003cli\u003eKeep total field wiring length under 305 meters (1000 feet) to maintain frequency response.\u003c\/li\u003e\n\u003cli\u003eRefer to frequency response graphs (Figures 10 and 12) for signal roll-off at high frequencies.\u003c\/li\u003e\n\u003cli\u003eProbe weight: 323 g\/m (11.4 oz) – plan for mechanical support accordingly.\u003c\/li\u003e\n\u003cli\u003eStorage and operating temperature: –52 °C to +177 °C (standard); avoid prolonged exposure below –34 °C to protect the pressure seal.\u003c\/li\u003e\n\u003cli\u003eThe Viton® O-ring seals differential pressure between tip and case (not pressure tested before shipment).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental \u0026amp; Compliance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCertified for Class I, Zone 0 (AEx\/Ex ia IIC T5…T1 Ga) with intrinsic safety barriers per drawing 141092.\u003c\/li\u003e\n\u003cli\u003eAlso approved for Class I, Division 2 and Zone 2 (nA, ec) per drawing 140979.\u003c\/li\u003e\n\u003cli\u003eWithstands humidity up to 93% for 56 days with minimal scale factor shift.\u003c\/li\u003e\n\u003cli\u003eProbe cable and connector tolerate –51 °C to +260 °C for extended range versions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x \u003cstrong\u003eBently Nevada 330104-15-25-10-02-05\u003c\/strong\u003e 3300 XL 8 mm Proximity Probe, Metric.\u003c\/li\u003e\n\u003cli\u003eIntegrated miniature coaxial ClickLoc connector with standard cable (1.0 m).\u003c\/li\u003e\n\u003cli\u003eMounting hardware and instruction sheet (quick start guide).\u003c\/li\u003e\n\u003cli\u003eCalibration certificate (factory traceable).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this probe brand new and original?\u003c\/strong\u003e\u003cbr\u003eYes, we supply 100% new, original Bently Nevada \u003cstrong\u003e330104-15-25-10-02-05\u003c\/strong\u003e probes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo you have stock available?\u003c\/strong\u003e\u003cbr\u003eYes, we maintain stock for this 3300 XL probe and ship within 5 business days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat shipping carriers do you use?\u003c\/strong\u003e\u003cbr\u003eWe ship via FedEx, UPS, or DHL – you can select your preferred option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the return policy?\u003c\/strong\u003e\u003cbr\u003eWe accept returns within 30 days of delivery for unused items.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use this probe in a Zone 0 area?\u003c\/strong\u003e\u003cbr\u003eYes, with proper intrinsic safety barriers, it meets AEx\/Ex ia IIC T5…T1 Ga requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the maximum cable length to the monitor?\u003c\/strong\u003e\u003cbr\u003eKeep field wiring under 305 meters (1000 feet) to avoid high-frequency roll-off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the probe come with a pressure test?\u003c\/strong\u003e\u003cbr\u003eProbes are not pressure tested before shipment; contact the custom design department if your application requires it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat makes this probe different?\u003c\/strong\u003e\u003cbr\u003eThe \u003cstrong\u003e330104-15-25-10-02-05\u003c\/strong\u003e features a 150 mm unthreaded length and 250 mm case – ideal for deep-reach installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContact Information Inquiries:\u003c\/strong\u003e \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e , \u003ca href=\"https:\/\/wa.me\/8615392429628\"\u003e+86 153 9242 9628\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePartner NexAuto Technology Limited:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46763382046881,"sku":"330104-15-25-10-02-05","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/330104-15-25-10-02-05.jpg?v=1785141658","url":"https:\/\/www.autonexcontrol.com\/products\/330104-15-25-10-02-05-bently-nevada-3300-xl-proximity-probe","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}