{"product_id":"330104-00-09-05-02-00-bently-nevada-3300-xl-8-mm-sensor-probe","title":"330104-00-09-05-02-00 Bently Nevada 3300 XL 8 mm Sensor Probe","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 330104-00-09-05-02-00 3300 XL 8 mm Proximity Probe\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Technical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Range:\u003c\/strong\u003e The linear range spans 2 mm (80 mils), starting from 0.25 mm (10 mils) to 2.3 mm (90 mils) from the target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Signal:\u003c\/strong\u003e The corresponding DC voltage ranges from approximately -1 Vdc to -17 Vdc across this linear interval.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap:\u003c\/strong\u003e For radial vibration measurements, set the gap at -9 Vdc, which equals about 1.27 mm (50 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e The nominal resistance (RPROBE) from center to outer conductor measures \u003cstrong\u003e7.45 ± 0.50 Ω\u003c\/strong\u003e for the 0.5 m length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e The standard probe operates from -52°C to +177°C (-62°F to +350°F). Extended range options reach up to +218°C for the tip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity Tolerance:\u003c\/strong\u003e The probe shows less than a 3% change in Average Scale Factor (ASF) after 56 days at 93% humidity per IEC 68-2-3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Sealing:\u003c\/strong\u003e A Viton® O-ring seals differential pressure between the probe tip and case. The probe is not pressure tested before shipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Protection:\u003c\/strong\u003e The probe carries ATEX and IECEx certifications for hazardous areas, including Class I, Zone 0 (ia) and Zone 2 (nA, ec).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eMechanical \u0026amp; Installation Details\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material:\u003c\/strong\u003e AISI 303 or 304 stainless steel (SST) ensures durability and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS) provides excellent insulation and wear resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Specification:\u003c\/strong\u003e M10 x 1 thread with a maximum engagement length of 15 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Torque:\u003c\/strong\u003e Tighten the probe to \u003cstrong\u003e11.2 N•m (100 in•lbf)\u003c\/strong\u003e. The maximum rated torque is 33.9 N•m (300 in•lbf).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable \u0026amp; Connector:\u003c\/strong\u003e The assembly includes a miniature coaxial ClickLoc connector with standard cable, total length 0.5 meter (1.6 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring:\u003c\/strong\u003e Use 0.2 to 1.5 mm² (16 to 24 AWG) tinned wiring. Maximum cable length between sensor and monitor is 305 meters (1,000 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e The probe weighs approximately 323 g\/m (11.4 oz per meter).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation \u0026amp; Handling Guidelines\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the probe using the M10 x 1 thread. Ensure the thread engagement does not exceed 15 mm.\u003c\/li\u003e\n\u003cli\u003eApply the recommended torque of 11.2 N•m to avoid damaging the probe case or threads.\u003c\/li\u003e\n\u003cli\u003eKeep the probe tip clean and free from debris before installation to ensure accurate readings.\u003c\/li\u003e\n\u003cli\u003eUse shielded triad cable for field wiring to minimize electrical noise and signal degradation.\u003c\/li\u003e\n\u003cli\u003eFor high-frequency applications, refer to frequency response graphs to account for signal roll-off with longer wiring.\u003c\/li\u003e\n\u003cli\u003eAvoid exposing the probe to temperatures below -34°C (-30°F) to prevent premature seal failure.\u003c\/li\u003e\n\u003cli\u003eStore the probe in a dry, temperature-controlled environment within the specified operating range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003cstrong\u003eBently Nevada 330104-00-09-05-02-00\u003c\/strong\u003e 3300 XL 8 mm Proximity Probe with armor.\u003c\/li\u003e\n\u003cli\u003ePre-attached 0.5 meter coaxial cable with miniature ClickLoc connector.\u003c\/li\u003e\n\u003cli\u003eInstallation and operation manual (provided in digital format).\u003c\/li\u003e\n\u003cli\u003eCertificate of calibration (traceable to NIST standards).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping \u0026amp; Delivery\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe ship all orders via FedEx, UPS, or DHL for fast and reliable delivery.\u003c\/li\u003e\n\u003cli\u003eMost orders dispatch within 5 business days after payment confirmation.\u003c\/li\u003e\n\u003cli\u003eTracking information will be provided via email once the shipment leaves our warehouse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this probe brand new and original?\u003c\/strong\u003e Yes, we supply only \u003cstrong\u003e100% new and original Bently Nevada\u003c\/strong\u003e parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo you have this model in stock?\u003c\/strong\u003e Yes, we maintain stock for the \u003cstrong\u003e330104-00-09-05-02-00\u003c\/strong\u003e and can ship promptly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the typical lead time?\u003c\/strong\u003e Orders ship within 5 working days. Express shipping options are available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I return this probe if it doesn't fit my application?\u003c\/strong\u003e Yes, we accept returns within 30 days of delivery, provided the item is unused and in original packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the maximum cable length for field wiring?\u003c\/strong\u003e The maximum length between the Proximitor Sensor and the monitor is 305 meters (1,000 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the probe work in hazardous areas?\u003c\/strong\u003e Yes, it is certified for Class I, Zone 0 (ia) and Zone 2 (nA, ec) environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor any inquiries about the \u003cstrong\u003eBently Nevada 330104-00-09-05-02-00\u003c\/strong\u003e or other 3300 XL series products, please contact us. Our team is ready to assist with technical support and order processing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Information:\u003c\/strong\u003e\u003cbr\u003eEmail: \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e\u003cbr\u003ePhone: \u003ca href=\"https:\/\/wa.me\/861539249628\"\u003e+86 153 9242 9628\u003c\/a\u003e (WhatsApp)\u003c\/p\u003e\n\u003cp\u003ePartner: \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003eNexAuto Technology Limited\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46795683627169,"sku":"330104-00-09-05-02-00","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/330104-00-09-05-02-00.jpg?v=1785489604","url":"https:\/\/www.autonexcontrol.com\/products\/330104-00-09-05-02-00-bently-nevada-3300-xl-8-mm-sensor-probe","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}