{"product_id":"330101-00-13-15-02-05-bently-nevada-3300-xl-8mm-probe","title":"330101-00-13-15-02-05 Bently Nevada - 3300 XL 8mm Probe","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 330101-00-13-15-02-05 3300 XL 8 mm Probe – Precision Vibration Sensing\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer \u0026amp; Model\u003c\/strong\u003e – \u003cstrong\u003eBently Nevada 330101-00-13-15-02-05\u003c\/strong\u003e belongs to the 3300 XL series 8 mm probe. It uses a 3\/8-24 UNF thread and has no armor for easier installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range \u0026amp; Sensitivity\u003c\/strong\u003e – The linear range spans 0.25 mm to 2.3 mm (10 to 90 mils). Standard systems deliver 7.87 V\/mm (200 mV\/mil) with an error within ±5%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance \u0026amp; Capacitance\u003c\/strong\u003e – The 1.5 meter probe shows 7.73 ± 0.50 Ω between center and outer conductors. Extension cable capacitance is 69.9 pF\/m (21.3 pF\/ft) typical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature \u0026amp; Environmental Tolerance\u003c\/strong\u003e – Standard probes operate from -52°C to +177°C. PPS tip material and stainless steel housing ensure reliable performance in harsh conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation \u0026amp; Sealing Design\u003c\/strong\u003e – Patented TipLoc and CableLoc technologies provide 330 N (75 lbf) pull strength. The optional FluidLoc option prevents oil leakage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals \u0026amp; Compliance\u003c\/strong\u003e – This model with option 05 carries CSA, ATEX, and IECEx certifications. It suits installations in hazardous areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring \u0026amp; Distance\u003c\/strong\u003e – Use 0.2 to 1.5 mm² (16 to 24 AWG) shielded triad cable. Maximum field wiring length reaches 305 meters (1000 feet).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eCore Technical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \u0026amp; Model\u003c\/strong\u003e – \u003cstrong\u003eBently Nevada 330101-00-13-15-02-05\u003c\/strong\u003e (3300 XL 8 mm probe).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread \u0026amp; Length\u003c\/strong\u003e – 3\/8-24 UNF thread; total length option 15 = 1.5 meters (4.9 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type\u003c\/strong\u003e – Miniature coaxial ClickLoc connector with standard cable (option 02).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range\u003c\/strong\u003e – 2 mm (80 mils), starting approximately 0.25 mm (10 mils) from the target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap Setting\u003c\/strong\u003e – Set to -9 Vdc (approximately 1.27 mm \/ 50 mils) for radial vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF)\u003c\/strong\u003e – Standard 5 or 1 meter system: 7.87 V\/mm ± 5% (including interchangeability error).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Straight Line (DSL)\u003c\/strong\u003e – Standard 5 or 1 meter system: less than ±0.025 mm (±1 mil) from 0°C to +45°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material\u003c\/strong\u003e – Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material\u003c\/strong\u003e – AISI 303 or 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e – 323 g\/m (11.4 oz).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range (Standard)\u003c\/strong\u003e – Operating and storage: -52°C to +177°C (-62°F to +350°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity Tolerance\u003c\/strong\u003e – Less than 3% change in Average Scale Factor after 56 days at 93% RH per IEC 68-2-3.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation Guidelines\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting the Probe\u003c\/strong\u003e – Screw the probe into the mounting hole using the 3\/8-24 UNF thread. Maintain the recommended gap between tip and target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Connection\u003c\/strong\u003e – Plug the ClickLoc connector firmly into the extension cable or proximitor. Avoid sharp bends in the cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring\u003c\/strong\u003e – Use 0.2 to 1.5 mm² (16 to 24 AWG) shielded triad cable. Maximum length is 305 meters (1000 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Notes\u003c\/strong\u003e – The probe seals differential pressure between tip and case. A Viton® O-ring provides the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Care\u003c\/strong\u003e – Do not expose the probe to temperatures below -34˚C (-30˚F) to prevent premature seal failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBently Nevada 330101-00-13-15-02-05\u003c\/strong\u003e probe (1 unit).\u003c\/li\u003e\n\u003cli\u003eInstallation instruction manual (1 copy).\u003c\/li\u003e\n\u003cli\u003eCalibration certificate (included).\u003c\/li\u003e\n\u003cli\u003eOriginal factory packaging with anti-shock material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this probe brand new and original?\u003c\/strong\u003e – Yes, we supply brand new original \u003cstrong\u003eBently Nevada 330101-00-13-15-02-05\u003c\/strong\u003e probes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the stock status?\u003c\/strong\u003e – We have units in stock and ship within 5 days after order placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich shipping carriers do you use?\u003c\/strong\u003e – We ship via FedEx, UPS, and DHL for fast and secure delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo you accept returns?\u003c\/strong\u003e – We accept returns within 30 days, provided the product is unused and in original packaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this probe suitable for hazardous areas?\u003c\/strong\u003e – Yes, the option 05 version carries CSA, ATEX, and IECEx certifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the maximum field wiring distance?\u003c\/strong\u003e – We recommend up to 305 meters (1000 feet) with attention to high-frequency signal rolloff.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContact Information Inquiries:\u003c\/strong\u003e \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e ， \u003ca href=\"https:\/\/wa.me\/8615392429628\"\u003e+86 153 9242 9628\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ePartner NexAuto Technology Limited : \u003ca href=\"https:\/\/www.nex-auto.com\/\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46670565277857,"sku":"330101-00-13-15-02-05","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/330101-00-13-15-02-05.jpg?v=1783582693","url":"https:\/\/www.autonexcontrol.com\/products\/330101-00-13-15-02-05-bently-nevada-3300-xl-8mm-probe","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}