{"product_id":"31000-00-00-00-070-03-02-bently-nevada-31000-housing","title":"31000-00-00-00-070-03-02 Bently Nevada 31000 Housing","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada 31000 Proximity Probe Housing – Model 31000-00-00-00-070-03-02\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Technical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer \u0026amp; Brand:\u003c\/strong\u003e Bently Nevada (Made in U.S.A.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Number:\u003c\/strong\u003e \u003cstrong\u003e31000-00-00-00-070-03-02\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Compatibility:\u003c\/strong\u003e Probe not required (Option 00) – housing only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e Not required (Option 00)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandoff Adapter:\u003c\/strong\u003e None (Option 00)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Penetration:\u003c\/strong\u003e 7.0 inches (Option 070)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Thread:\u003c\/strong\u003e 3\/4-14 NPT (Option 02)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFittings Included:\u003c\/strong\u003e Two plugs, one 3\/4-14 NPT fitting, one 3\/4-14 to 1\/2-14 NPT SST reducer, and a cable seal grip with three grommet sizes (1\/8–3\/16 in, 1\/4–5\/16 in, 5\/16–3\/8 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Glass-reinforced Polyphenylene Sulfide (PPS) with conductive fibers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleeve \u0026amp; Chain Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Sleeve \u0026amp; Screws:\u003c\/strong\u003e AISI 303 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-Ring Material:\u003c\/strong\u003e Neoprene® (Viton O-ring internal to probe case)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Ratings:\u003c\/strong\u003e CSA Type 4X, IP66 (verified by SC115582-1), and CENELEC EN50014 for electrostatic dissipation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating:\u003c\/strong\u003e -51°C to +105°C (-60°F to +221°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Strength:\u003c\/strong\u003e BASEEFA certified for 4 J at -39°C and 115°C; CSA verified 7 J at ambient\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Torque (retaining nut):\u003c\/strong\u003e 29.4 N·m (260 in·lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.2 kg (2.6 lb) typical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation \u0026amp; Mounting Guidelines\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the housing on the outer sleeve through the end hole with the axis parallel to horizontal.\u003c\/li\u003e\n\u003cli\u003eTighten the retaining nut to the recommended torque of 29.4 N·m for a secure seal.\u003c\/li\u003e\n\u003cli\u003eUse the provided cable seal grip with the appropriate grommet for your cable diameter.\u003c\/li\u003e\n\u003cli\u003eFor standoff adapter applications, always use the 3\/4-14 NPT mounting thread option.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the probe penetration of 7.0 inches to maintain proper clearance.\u003c\/li\u003e\n\u003cli\u003eVerify that the O-rings (Viton internal, Neoprene external) are properly seated before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eEnvironmental \u0026amp; Mechanical Durability\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe housing withstands two separate 4 Joule impacts at -39°C and +115°C (BASEEFA certified).\u003c\/li\u003e\n\u003cli\u003eCSA tested samples to endure a 7 Joule impact at room temperature without failure.\u003c\/li\u003e\n\u003cli\u003eType 4X and IP66 ratings ensure protection against water jets and corrosion.\u003c\/li\u003e\n\u003cli\u003eThe PPS thermoplastic body resists chemicals and thermal stress in demanding settings.\u003c\/li\u003e\n\u003cli\u003eAll stainless steel components (AISI 303\/304) provide excellent resistance to rust and wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePressure \u0026amp; Sealing Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe \u003cstrong\u003e31000-00-00-00-070-03-02\u003c\/strong\u003e seals differential pressure between the probe tip and housing body when used with a 3300 XL 8 mm probe.\u003c\/li\u003e\n\u003cli\u003eInternal sealing uses a Viton O-ring; the sleeve-to-housing seal uses a Neoprene O-ring.\u003c\/li\u003e\n\u003cli\u003eThis assembly is not designed to resist internal or external pressure loads.\u003c\/li\u003e\n\u003cli\u003eBently Nevada does not pressure-test probes before shipment.\u003c\/li\u003e\n\u003cli\u003eContact the custom design department if your application requires a pressure seal test.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003cstrong\u003e31000-00-00-00-070-03-02\u003c\/strong\u003e Proximity Probe Housing (with cover and grounding liner installed)\u003c\/li\u003e\n\u003cli\u003e1 x Outer sleeve (AISI 304 stainless steel) with retaining chain\u003c\/li\u003e\n\u003cli\u003e1 x Cable seal grip with three interchangeable grommets (1\/8–3\/16 in, 1\/4–5\/16 in, 5\/16–3\/8 in)\u003c\/li\u003e\n\u003cli\u003e1 x 3\/4-14 NPT fitting and 1 x 3\/4-14 to 1\/2-14 NPT SST reducer\u003c\/li\u003e\n\u003cli\u003e2 x Plugs for unused ports\u003c\/li\u003e\n\u003cli\u003eInstallation instructions sheet (printed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping \u0026amp; Logistics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe ship all orders via FedEx, UPS, or DHL – you choose the preferred carrier.\u003c\/li\u003e\n\u003cli\u003eTypical dispatch time is within 5 business days after order confirmation.\u003c\/li\u003e\n\u003cli\u003eAll units are brand new, original Bently Nevada stock, ready for immediate shipment.\u003c\/li\u003e\n\u003cli\u003eWe offer a 30-day return policy for unused items in original packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this housing include a probe?\u003c\/strong\u003e\u003cbr\u003eNo – this model (Option 00 for probe) supplies the housing only. You can install a 3300 XL 8 mm probe separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use this housing in a pressurized vessel?\u003c\/strong\u003e\u003cbr\u003eNo – the housing seals against environmental ingress but does not withstand internal or external pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the maximum cable diameter the seal grip supports?\u003c\/strong\u003e\u003cbr\u003eThe grip accommodates cables from 1\/8 in to 3\/8 in with the three included grommets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo you test the pressure seal before shipping?\u003c\/strong\u003e\u003cbr\u003eBently Nevada does not perform pressure testing; contact our custom team if you need this service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the typical lead time for this item?\u003c\/strong\u003e\u003cbr\u003eWe maintain stock and ship within 5 business days via FedEx, UPS, or DHL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I return this product if it does not fit my application?\u003c\/strong\u003e\u003cbr\u003eYes – we accept returns within 30 days for unused items in original packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContact Information Inquiries:\u003c\/strong\u003e \u003ca href=\"mailto:sales@nex-auto.com\"\u003esales@nex-auto.com\u003c\/a\u003e | \u003ca href=\"https:\/\/wa.me\/861539249628?text=Inquiry%20about%20Bently%20Nevada%2031000-00-00-00-070-03-02\"\u003e+86 153 9242 9628 (WhatsApp)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePartner NexAuto Technology Limited:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.nex-auto.com\/\" target=\"_blank\"\u003ehttps:\/\/www.nex-auto.com\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46595819995297,"sku":"31000-00-00-00-070-03-02","price":224.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5390\/3265\/files\/31000-00-00-00-070-03-02.jpg?v=1782270813","url":"https:\/\/www.autonexcontrol.com\/products\/31000-00-00-00-070-03-02-bently-nevada-31000-housing","provider":"AutoNex Controls Limited ","version":"1.0","type":"link"}