GE Fanuc IC660TBD120 - Terminal Assembly

Product Overview: GE Fanuc High-Speed Counter Terminal Assembly

Key Technical Specifications

• Brand & Model: This is an original GE Fanuc IC660TBD120 terminal assembly.
• Series & Type: It belongs to the Genius I-O series and functions as a high-speed counter block interface.
• Operating Voltage: It supports a dual range: 93 to 132 Volts AC and 10 to 30 Volts DC.
• Frequency & Ripple: AC frequency range is 47-63 Hz with a maximum ripple of 10%.
• Power Requirements: Typical AC current is 60mA (250mA max). Typical DC current is 200mA (300mA max at 12V).
• Dropout Time: AC dropout is 1 cycle. DC dropout is 10ms at 12V / 75ms at 24V.
• Physical Data: Dimensions are 224 x 90 x 112 mm (8.8" x 3.5" x 4.4") with a weight of 1.8 kg (4 lbs).
• Temperature Range: It operates from 0 to 60°C (32 to 140°F).

Wiring & Installation Guidance

• The IC660TBD120 features 32 screw-clamp terminals that accept AWG #22 through #12 wires, both stranded and solid.
• Field wiring for the I/O block is completed entirely through this terminal assembly.
• You can remove the electronics assembly without disturbing any field wiring for easy maintenance.
• Use prefabricated cables to simplify wiring between different I/O blocks in your system.
• When terminating a bus, place appropriate terminal resistors (75, 100, 120, or 150 Ohms) across the Serial 1 and Serial 2 terminals.
• Be careful not to over-torque the terminal screws during installation to avoid damage.

High-Speed Counter Performance

• The assembly supports a high count rate of 200 kilohertz when a high-frequency filter is selected.
• With a low-frequency filter, the count rate is 40 Hertz for slower applications.
• It features a maximum inrush current of 3 Amps per output and a circuit overcurrent threshold of 4 Amps.
• The maximum block steady-state output current is 2 Amps for continuous operation.
• Output voltage drop is 2 Volts at standard inrush and 0.25 Volts at a 0.5 Amp current rating.
• Built-in diagnostic facilities can detect wiring errors between the terminal assembly and the counter block.

Frequently Asked Questions (FAQ)

• What is the IC660TBD120 used for?
  It is a terminal assembly for high-speed counting applications like motion control and flow measurement.
• What voltages does it support?
  The IC660TBD120 operates on both 93-132V AC and 10-30V DC power sources.
• What is the maximum counting speed?
  It can count at speeds up to 200 kHz with the appropriate high-frequency filter setting.
• Is it compatible with other Genius I/O blocks?
  No, it is specifically designed for use with the IC660BBD120 High-Speed Counter Block.
• Do you have it in stock?
  Yes, we carry new, original stock and ship orders promptly.
• What wire sizes can be used?
  The screw terminals accept wires from AWG #22 up to AWG #12.

Contact Information & Partner Details

• Sales Inquiries: sales@nex-auto.com
• Phone/WhatsApp: +86 153 9242 9628
• Official Partner: NexAuto Technology Limited