Passer aux informations sur le produit
1 sur 3

Bently Nevada - Accelerometer Acceleration Tranducer 330400-02-RU

En stock (17 unités), prêt à être expédié

Bently Nevada 330400-02-RU Accelerometer Transducer

Product Overview

  • Manufacturer: Bently Nevada
  • Model Number: 330400-02-RU
  • Product Type: Accelerometer Acceleration Transducer
  • Country of Origin: Made in U.S.A.
  • Mounting Thread: M8 x 1 integral stud
  • Agency Approval: Country Specific (RU)
  • Certificate of Origin: Available upon request

Technical Specifications

  • Sensitivity: 10.2 mV/m/s² (100 mV/g) ±5%
  • Acceleration Range: 490 m/s² (50 g) peak within 10 Hz to 15 kHz
  • Amplitude Linearity: ±1% up to 490 m/s² (50 g) peak
  • Broadband Noise Floor: 0.039 m/s² (0.004 g) RMS
  • Frequency Response: 10 Hz to 15 kHz (±3dB), 30 Hz to 10 kHz (±10%)
  • Temperature Sensitivity: -11% to +3% over operating range
  • Transverse Sensitivity: Less than 5% of axial
  • Mounted Resonant Frequency: Greater than 30 kHz
  • Resonant Peak Amplitude: 20 dB maximum
  • Base Strain Sensitivity: 49 mm/s²/mstrain (0.005 g/mstrain) for serial numbers with "G" prefix
  • Maximum Cable Length: 305 meters (1000 ft) without signal degradation

Electrical Requirements

  • Input Voltage: -24 ± 0.5 Vdc
  • Bias Current: 2 mA nominal
  • Output Bias Voltage: -8.5 ± 0.5 Vdc
  • Grounding: Case isolated for enhanced safety

Environmental Performance

  • Operating Temperature: -55°C to +121°C (-67°F to +250°F)
  • Storage Temperature: -55°C to +121°C (-67°F to +250°F)
  • Shock Survivability: 49,050 m/s² (5000 g) peak
  • Relative Humidity: 100% condensing, non-submerged
  • Construction: Hermetically sealed case
  • Magnetic Field Susceptibility: <2.21 mm/s²/gauss (225 mg/gauss)
  • IP Rating: Equivalent to IP68 (dust tight and watertight)

Physical Specifications

  • Weight: 99 g (3.5 oz) without cable
  • Diameter: 23 mm (0.93 in)
  • Height: 59 mm (2.3 in) including mounting stud
  • Connector: 3-pin MIL-C-5015 Receptacle
  • Connector Material: 316L stainless steel
  • Mounting Surface: 32 μin RMS finish
  • Mounting Torque: 4.1 N·m (3.0 ft·lb)
  • Case Material: 316L stainless steel
  • Mounting Orientation: Any angle supported

Contact our sales team for specifications and pricing:
Email: sales@nex-auto.com

Download complete technical documentation:
330400 and 330425 Accelerometer Datasheet

Expédition rapide et fiable

Livraison rapide dans le monde entier

pour que vos projets d'automatisation respectent les délais.

Authentique et Fiable

Tous les composants sont 100 % authentiques

garantissant des performances fiables pour vos systèmes.

  • Livraison express
  • 12 mois de garantie
  • Retour facile sous 30 jours
Voir les détails du produit

Service client

Obtenez de l'aide quand vous en avez le plus besoin