330103-00-04-50-11-00 | 3300 XL Proximity Probe Bently Nevada

330103-00-04-50-11-00: Bently Nevada 3300 XL 8 mm Proximity Probe

• 330103-00-04-50-11-00 probe comes without armor armor. It uses an M10 x 1 thread for easy mounting.
• Unthreaded length option: 00 = 0 mm minimum. Overall case length: 04 = 40 mm.
• Total length option: 50 = 5.0 meters (16.4 feet). This 5‑meter probe works only with the 5‑meter Proximitor sensor.
• Connector type: miniature coaxial ClickLoc connector with connector protector. Cable type: FluidLoc cable (option 11). Agency approval not required (00).

Technical Specifications – Core Parameters

• Brand & Model: Bently Nevada 330103-00-04-50-11-00 (3300 XL 8 mm Probe).
• Probe Tip Material: Polyphenylene sulfide (PPS). Case material: AISI 303 or 304 stainless steel.
• Linear Range: 2 mm (80 mils) from approximately 0.25 mm to 2.3 mm (10 to 90 mils). Output spans –1 to –17 Vdc.
• Recommended Gap Setting (Radial Vibration): -9 Vdc, approx. 1.27 mm (50 mils).
• Nominal DC Resistance (5.0m): 8.73 Ω ± 0.50 (center conductor to outer conductor).
• Field Wiring: 0.2 to 1.5 mm² (16 to 24 AWG). Use 3-conductor shielded triad cable. Max length between Proximitor sensor and monitor: 305 meters (1,000 feet).

Environmental & Temperature Tolerances

• Standard Probe Operating & Storage: -52°C to +177°C (-62°F to +350°F).
• Extended Temperature Range Probe: Tip from -52°C to +218°C; cable/connector from -51°C to +260°C.
• Exposing the probe below –34°C (-30°F) may cause premature pressure seal failure.
• Relative Humidity: Less than 3% change in Average Scale Factor (ASF) after 56 days at 93% humidity (IEC 68‑2‑3).
• Pressure sealing: Viton® O‑ring between probe tip and case. Design prevents differential pressure leaks.

Frequently Asked Questions (FAQ)

• Q: Is the 330103-00-04-50-11-00 probe brand new and original?
  A: Yes, we supply only brand new, authentic Bently Nevada probes with full traceability.
• Q: Do you have stock for this model?
  A: Yes, we have ample stock of 330103-00-04-50-11-00. Ready to ship immediately.
• Q: What is the maximum cable length for the Proximitor sensor?
  A: This 5‑meter probe works exclusively with the 5‑meter Proximitor sensor. Do not intermix different cable lengths.
• Q: Can I use this probe in high humidity areas?
  A: Yes, design meets IEC 68‑2‑3 with less than 3% ASF change after 56 days at 93% humidity.
• Q: What is the linear measurement range?
  A: 2 mm (80 mils) from 0.25 mm up to 2.3 mm. Output voltage spans –1 to –17 Vdc for that range.
• Q: What is the recommended gap voltage for radial vibration?
  A: Set the gap to -9 Vdc, which equals approximately 1.27 mm (50 mils) from the target.
• Q: Do you support 30‑day returns?
  A: Yes, we provide a 30‑day return window for unused items in original packaging.
• Q: How quickly will you ship?
  A: We ship within 5 days via FedEx, UPS, or DHL. Tracking provided.
• Q: What is the probe tip temperature limit for standard model?
  A: -52°C to +177°C. For extended range tips, see specifications above.
• Q: Is the probe pressure tested before shipment?
  A: Standard units are not pressure tested. Contact our custom design team if you require a pressure seal test.

Contact Information Inquiries: sales@nex-auto.com , +86 153 9242 9628 (WhatsApp).

Partner NexAuto Technology Limited : https://www.nex-auto.com/